<1><信息中心首页><icmain.htm>
<2><概述和新增内容><icoverview.htm>
<2><可打印的 PDF><icpdflist.htm>
<2><信息中心的相关 FAQ><icfaq.htm>
<2><信息中心更新><icupdates.htm>
<2><信息中心里现在的 pSeries 文档><icpserieslist.htm>
<2><站点图><icsitemap.htm>
<1><规划><iphadkickoff.htm>
<1><初始服务器安装><iphaf/iphafisskickoff.htm>
<2><新增内容><iphaf/whatsnew.htm>
<2><可打印的 PDF><iphaf/iphafprintpdfs.htm>
<2><创建定制的安装核对表><iphaf/issintwelcome.htm>
<2><使用预定义的安装核对表><iphaf/iphafpredefined.htm>
<3><不带 LPAR 的型号 520 和 9113-550><iphaf/predefcsunolpar.htm>
<3><带 LPAR 的型号 520 和 9113-550><iphaf/predefcsulpar.htm>
<3><不带 LPAR 的型号 9406-550 和 570><iphaf/predefcenolpar.htm>
<3><带 LPAR 的型号 9406-550 和 570><iphaf/predefcelpar.htm>
<3><所有型号><iphaf/iphafentire.htm>
<2><相关信息><iphaf/iphafrelatedinfo.htm>
<1><Migrating or upgrading your server><iphbj/kickoff.htm>
<2><iSeries systems><iphbj/iserieskickoff.htm>
<3><Upgrades><iphbg/iphbgkickoff.htm>
<4><升级><iphbg/iphbgkickoff.htm>
<5><新增内容><iphbg/whatnew.htm>
<5><可打印的 PDF><iphbg/hdrprint.htm>
<5><升级概念><iphbg/hdrconcepts.htm>
<6><升级术语><iphbg/rzamdupgradeterms.htm>
<6><升级途径><iphbg/hdrpaths.htm>
<6><升级时间线><iphbg/hdrconcept.htm>
<5><升级核对表><iphbg/checklist.htm>
<5><升级服务器><iphbg/hdrupgradesteps.htm>
<6><升级规划任务><iphbg/planningtasks.htm>
<6><订购任务><iphbg/ordertasks.htm>
<7><配置订单><iphbg/configorder.htm>
<7><验证订单><iphbg/validateorder.htm>
<7><验证您的升级项目规划><iphbg/validateprojectp.htm>
<7><发出订单><iphbg/placeorder.htm>
<6><准备任务><iphbg/preparationtasks.htm>
<7><确认您的升级计划><iphbg/confirmschedule.htm>
<7><准备环境><iphbg/prepareenvironment.htm>
<8><添加、替换或除去硬件功能部件><iphbg/addreplacehdwfeature.htm>
<9><准备功能部件升级><iphbg/hdrprocinst.htm>
<9><执行功能部件升级><iphbg/hdrfeatureupgradedonelpar.htm>
<9><执行资源管理><iphbg/hdrresourcemgmtlpar.htm>
<8><激活不活动的资源><iphbg/hdrswupgrade.htm>
<8><转换分区服务器的扩展部件><iphbg/rzamdexpanupgradelpar.htm>
<9><扩展部件转换途径和注意事项><iphbg/exunitpathscon.htm>
<9><准备转换扩展部件><iphbg/rzamdprepexpanupgradelpar.htm>
<10><对 SPCN 寻址重排序><iphbg/rzamdexpanupgradelparspcn.htm>
<10><打印和准备扩展部件转换的配置><iphbg/rzamdexpanupgradelpardoc.htm>
<8><清除磁盘存储器><iphbg/cleandisks.htm>
<8><清除系统硬件><iphbg/cleansystem.htm>
<8><调整内存和处理资源><iphbg/adjustmemproc.htm>
<8><更改配置对象><iphbg/changeobject.htm>
<8><收集性能数据><iphbg/gatherperfdata.htm>
<8><准备控制台><iphbg/prepareconsole.htm>
<8><备份数据><iphbg/backupdata.htm>
<7><制定测试方案><iphbg/developtestplan.htm>
<7><安排验收复查><iphbg/schedulereview.htm>
<6><预安装任务><iphbg/preinstallationtasks.htm>
<7><打印系统信息><iphbg/printsystem.htm>
<7><将 LPAR 配置复制到软盘><iphbg/copylparconfig.htm>
<7><记录用户标识和密码><iphbg/recorduserid.htm>
<7><准备升级场所><iphbg/preparelocation.htm>
<7><复查您的项目和应变计划><iphbg/reviewplans.htm>
<6><安装任务><iphbg/installationtasks.htm>
<7><确保您已完成必要任务><iphbg/completetasks.htm>
<7><安装软件><iphbg/installsw.htm>
<8><升级 i5/OS 和相关软件><iphbg/uptov5r3.htm>
<8><升级和准备 Linux 以进行服务器升级><iphbg/preplinux.htm>
<8><安装修订包><iphbg/installfixes.htm>
<8><备份系统><iphbg/systembackup.htm>
<7><安装硬件><iphbg/installhardware.htm>
<8><为升级完成最终的系统准备><iphbg/finalpreptasks.htm>
<8><提供核对表和系统信息><iphbg/validatereadiness.htm>
<8><关闭系统><iphbg/shutdownhandoff.htm>
<8><执行硬件安装（授权的服务提供者）><iphbg/servicereptasks.htm>
<8><接收目标系统><iphbg/machineacceptance.htm>
<6><安装后任务><iphbg/postinstallationtasks.htm>
<7><最终确定系统配置><iphbg/finalizeconfig.htm>
<7><保存系统分区和所有固件><iphbg/savesystem.htm>
<7><对系统进行测试><iphbg/testsystem.htm>
<5><方案：升级><iphbg/scenarios.htm>
<5><故障诊断><iphbg/troubles.htm>
<5><相关信息><iphbg/hdrrelatedinfo.htm>
<3><Data migration><iphbh/hdrkickoff.htm>
<4><数据迁移><iphbh/hdrkickoff.htm>
<5><新增内容><iphbh/hdrwhatnew.htm>
<5><可打印的 PDF><iphbh/hdrprint.htm>
<5><概念><iphbh/concepts.htm>
<5><规划数据迁移><iphbh/hdrplanmigration.htm>
<6><数据迁移规划的硬件注意事项><iphbh/planhardw.htm>
<6><数据迁移规划的软件注意事项><iphbh/plansoftw.htm>
<6><数据迁移规划的控制台注意事项><iphbh/planconn.htm>
<6><记录数据迁移规划><iphbh/finishplan.htm>
<5><准备数据迁移><iphbh/hdrmigrationprep.htm>
<6><在源服务器上准备 OS/400 V5R3 的数据迁移><iphbh/migratev5r3.htm>
<6><准备从 V5R1 或 V5R2 中迁移数据><iphbh/hdmigrationprep45xx.htm>
<6><准备从 SUSE LINUX Enterprise Server 9 中迁移数据><iphbh/prepsuselinux.htm>
<5><执行数据迁移><iphbh/performing.htm>
<6><在源服务器上完成 OS/400 V5R3 的数据迁移><iphbh/hdrmigrationproc.htm>
<6><完成从 V5R1 或 V5R2 中迁移数据><iphbh/hdrmigrationproc45xx.htm>
<6><完成从 SUSE LINUX Enterprise Server 9 中迁移数据><iphbh/completesuselinux.htm>
<5><方案：数据迁移><iphbh/scenarios.htm>
<5><故障诊断><iphbh/troubles.htm>
<5><相关信息><iphbh/relinfo.htm>
<2><pSeries systems><iphbj/pserieskickoff.htm>
<3><Upgrades for pSeries systems><iphbm/iphbmkickoff.htm>
<4><Printable PDFs><iphbm/iphbmprintthis.htm>
<4><Concepts><iphbm/iphbmconcepts.htm>
<5><Upgrade paths><iphbm/iphbmpaths.htm>
<5><Upgrade considerations><iphbm/iphbm_upgrade_considerations.htm>
<5><Upgrade terminology for pSeries><iphbm/iphbmupgradeterms.htm>
<4><Upgrade checklist><iphbm/iphbmupgradechecklist.htm>
<4><Ordering Tasks><iphbm/iphbmorder.htm>
<5><Configuring your order><iphbm/iphbm_configorder.htm>
<5><Validating your order><iphbm/iphbm_validateorder.htm>
<5><Validating your upgrade project plan><iphbm/iphbm_validateprojectp.htm>
<5><Placing your order><iphbm/iphbm_placeorder.htm>
<4><Planning your upgrade><iphbm/iphbmplanupgrade.htm>
<5><Upgrade planning tasks><iphbm/iphbm_plan_checklist.htm>
<5><Confirming your upgrade schedule><iphbm/iphbmschedule.htm>
<5><Cleaning up disk storage><iphbm/iphbmcleanupdisk.htm>
<5><Adjusting memory and processing resources><iphbm/iphbmadjustmem.htm>
<5><Preparing your console><iphbm/iphbmpreparecon.htm>
<5><Developing your test plan><iphbm/iphbmdeveloptest.htm>
<5><Scheduling your acceptance review><iphbm/iphbmacceptreview.htm>
<4><Preparing for upgrade for pSeries><iphbm/iphbmprepare.htm>
<5><Software considerations><iphbm/iphbm_sw_considerations.htm>
<5><System backup requirements><iphbm/iphbm_sys_backup.htm>
<5><Preparing your location for the upgrade><iphbm/iphbmlocation.htm>
<5><Reviewing your project and contingency plans><iphbm/iphbmcontingency.htm>
<5><Running the AIX pre_migration script><iphbm/iphbm_run_premigration.htm>
<4><Performing your upgrade><iphbm/iphbmupgradetasks.htm>
<5><Updating AIX with a new maintenance level><iphbm/iphbm_updateall_howto.htm>
<5><Migrating AIX to a new version or release><iphbm/iphbm_migration_howto.htm>
<5><Backing up AIX to CD><iphbm/iphbmbackup.htm>
<5><Configuring the HMC management environment><ipha1/configuringyourhmcmanagementenvironment.htm>
<5><Saving your existing partition profiles from a Hardware Management Console><iphbm/iphbm_migrate_part.htm>
<5><Restore an AIX system backup from CD><iphbm/iphbm_update_profiles.htm>
<4><Scenarios: pSeries upgrades><iphbm/iphbmupgradescenarios.htm>
<5><Upgrading a pSeries 650 with an HMC to a p5 570 with an HMC><iphbm/iphbm_p650_p570_hmc.htm>
<5><Upgrading a pSeries 650 without an HMC to a p5 570 without an HMC><iphbm/iphbm_p650_p570_no_hmc.htm>
<5><Upgrading a pSeries 650 without an HMC to a p5 570 with an HMC><iphbm/iphbm_p650_p570_mix.htm>
<4><Testing your system><iphbm/iphbmtesting.htm>
<4><Troubleshooting the upgrade><iphbm/iphbmupgradetroubleshoot.htm>
<4><Related information><iphbm/iphbmupgraderelatedinfo.htm>
<1><虚拟化您的计算环境><iphb1/kickoff.htm>
<2><Virtualizing your computing environment><iphb1/kickoff.htm>
<3><Printable PDFs><iphb1/printablepdfs.htm>
<3><Concepts for a virtual computing environment><iphb1/whatisvirtualization.htm>
<4><The Virtualization Engine><iphb1/virtualizationengine.htm>
<4><POWER Hypervisor><iphb1/virthypervisor.htm>
<4><Micro-Partitioning><iphb1/virtmicropart.htm>
<4><Virtual I/O Server><iphb1/virtio.htm>
<4><Virtual Ethernet><iphb1/virtethernet.htm>
<4><Shared Ethernet Adapter><iphb1/virtshafredethernetadapt.htm>
<4><Capacity on demand><iphb1/virtcod.htm>
<4><Multiple operating system support><iphb1/virtmultossup.htm>
<3><Planning for your virtualized environment><iphb1/planningforyourvirtualizedenvironment.htm>
<3><Dividing a single server into multiple servers><iphb1/dividingasingleserverintomultipleservers.htm>
<3><Dynamically managing logical partition resources><iphb1/dynamicallyaddingresources.htm>
<1><Installing hardware><iphag/installhardware.htm>
<2><Cabling your server><iphah/cablekickoff.htm>
<3><Printable PDF><iphah/printiphah.htm>
<3><Cable your model 520 server with a console><iphah/e520.htm>
<4><Advanced System Management Interface (ASMI)><iphah/e520asmieu.htm>
<4><Hardware Management Console (HMC)><iphah/e520hmceu.htm>
<4><Operations Console><iphah/e520opsconeu.htm>
<4><Twinaxial console><iphah/e520twineu.htm>
<4><Schematic diagrams of a model 520 server><iphah/e520graphic.htm>
<3><Cable your model 550 server with a console><iphah/e550.htm>
<4><Advanced System Management Interface (ASMI)><iphah/e550asmieu.htm>
<4><Hardware Management Console (HMC)><iphah/e550hmceu.htm>
<4><Operations Console><iphah/e550opsconeu.htm>
<4><Twinaxial console><iphah/e550twineu.htm>
<4><Schematic diagrams of a model 550 server><iphah/e550.htm>
<3><Cable your model 570 server with a console><iphah/e570.htm>
<4><Advanced System Management Interface (ASMI)><iphah/e570asmieu.htm>
<4><Hardware Management Console (HMC)><iphah/e570hmceu.htm>
<4><Operations Console><iphah/e570opsconeu.htm>
<4><Twinaxial console><iphah/e570twineu.htm>
<4><Schematic diagrams of a model 570 server><iphah/e570.htm>
<2><Adding a console><iphai/addconsole.htm>
<3><Hardware Management Console><iphai/hmc.htm>
<4><What's new><iphai/whatsnew.htm>
<4><Printable PDF><iphai/printhmcpdf.htm>
<4><Before you begin:  About the HMC><iphai/concepts.htm>
<5><Implementations of Hardware Management Consoles><iphai/hmctypes.htm>
<5><Predefined passwords><iphai/whychgprepwds.htm>
<5><Installation requirements for the remote client><iphai/remoteinstallreqs.htm>
<5><Remote client comparison><iphai/staticvswebstart.htm>
<5><System Manager Security><iphai/clientserver.htm>
<4><Setting up the HMC><iphai/installhmc.htm>
<5><Cabling the HMC><iphai/cable.htm>
<5><Gathering required configuration settings><iphai/prep.htm>
<5><Configuring the HMC><iphai/configure.htm>
<6><Fast path configuration using the Guided Setup wizard><iphai/fastpathgs.htm>
<6><Using the Guided Setup wizard><iphai/confighmcgs.htm>
<6><Using the HMC configuration checklist><iphai/configchklst.htm>
<4><Installing and uninstalling the remote client><iphai/remotehmc.htm>
<5><Installing the Web-based System Manager Remote Client for Java Web Start><iphai/installwebstart.htm>
<5><Uninstalling the Web-based System Manager Remote Client for Java Web Start><iphai/uninstallwebstart.htm>
<5><Installing the Web-based System Manager Remote Client><iphai/installstatic.htm>
<5><Uninstalling the Web-based System Manager Remote Client><iphai/uninstallstatic.htm>
<5><Configuring System Manager Security><iphai/securehmc.htm>
<6><Configuring one HMC as a CA><iphai/confighmcasca.htm>
<6><Generating private key ring files><iphai/generatekrf.htm>
<6><Installing private key ring files><iphai/installkrf.htm>
<6><Distributing the CA's public key><iphai/distpubkey.htm>
<6><Viewing configuration properties><iphai/viewprops.htm>
<6><Configuring HMC object manager security><iphai/configobmansec.htm>
<4><Changing the console that manages i5/OS><iphai/chgos400con.htm>
<5><HMC to Operations Console><iphai/hmctoops.htm>
<5><HMC to twinaxial console><iphai/hmctotwinax.htm>
<5><Operations Console to HMC><iphai/opstohmc.htm>
<5><Twinaxial console to HMC><iphai/twinaxtohmc.htm>
<4><Troubleshooting><iphai/troubleshoot.htm>
<4><Related information><iphai/relatedinfo.htm>
<3><Advanced System Management Interface><iphby/asmi.htm>
<3><Operations Console><iphbx/opsconsole.htm>
<3><Twinaxial console><iphbn/kickoff.htm>
<3><Graphics terminal><iphai/graphics.htm>
<2><Installing features and replacing parts><iphaj/installcifcio.htm>
<3><What's new><iphaj/whatsnew.htm>
<3><Select by model or expansion unit><iphaj/selectmodel.htm>
<4><520><iphaj/iphw2.htm>
<4><550><iphaj/iphw4.htm>
<4><570><iphaj/iphwm.htm>
<4><5074 and 5079><iphaj/ipheu5074.htm>
<4><5088 and 0588><iphaj/ipheu5088.htm>
<4><5094 and 5294><iphaj/ipheu5094.htm>
<4><5095 and 0595><iphaj/ipheu5095.htm>
<4><7311-D11><iphaj/ipheu7311d11.htm>
<4><7311-D20><iphaj/ipheu7311d20.htm>
<3><Select by feature or part><iphaj/selectcifcio.htm>
<1><对服务器分区><iphat/iphatlparkickoff.htm>
<2><新增功能><iphat/iphatwhatsnew.htm>
<2><可打印 PDF><iphat/iphatprintpdfs.htm>
<2><对服务器分区的概念><iphat/iphatlparconceptskickoff.htm>
<3><分区的好处><iphat/iphatlparbenefits.htm>
<3><逻辑分区配置类型><iphat/iphatlpartypes.htm>
<4><逻辑分区><iphat/iphatlparchoices.htm>
<4><制造缺省配置><iphat/iphatlparmgc.htm>
<4><服务分区><iphat/iphatservicelpar.htm>
<4><虚拟 I/O 服务器分区><iphat/iphatvirtualioserveroverview.htm>
<3><分区组件><iphat/iphatlparcomponents.htm>
<4><受管系统><iphat/iphatmanagesys.htm>
<4><概要文件><iphat/iphatlparprofiles.htm>
<5><分区概要文件><iphat/iphatparprofile.htm>
<5><具有所有系统资源的分区概要文件><iphat/iphatfullsystem.htm>
<5><系统概要文件><iphat/iphatsysprofile.htm>
<3><硬件资源><iphat/iphatlparhw.htm>
<4><最小配置><iphat/iphatlparosmin.htm>
<5><AIX><iphbk/iphbkaixminreqs.htm>
<5><i5/OS><iphbl/iphbllparosmin.htm>
<5><Linux><iphbi/iphbiminimumconfig.htm>
<4><物理和虚拟硬件资源><iphat/iphatphysicalvsvirtual.htm>
<5><虚拟适配器><iphbi/iphbivirtualadapters.htm>
<5><各个 OS 如何实现虚拟资源><iphat/iphatosvirtualoverview.htm>
<6><AIX><iphat/iphataixvirtual.htm>
<6><i5/OS><iphat/iphati5osvirtual.htm>
<7><虚拟串行适配器><iphbi/iphbivirtualserial.htm>
<7><虚拟 SCSI><iphbi/iphbivirtualscsi.htm>
<6><Linux><iphat/iphatlinuxvirtual.htm>
<5><处理器><iphat/iphatlparprocessor.htm>
<6><专用处理器><iphat/iphatdedproc.htm>
<6><共享处理器><iphat/iphatsharedproc.htm>
<7><虚拟处理器><iphat/iphatvirtualproc.htm>
<7><i5/OS 许可协议的注意事项><iphbl/iphblos400license.htm>
<5><内存><iphat/iphatlparmemory.htm>
<6><AIX 逻辑分区的内存><iphbk/iphbkaixmemreqs.htm>
<6><i5/OS 逻辑分区的内存><iphbl/iphbllparmemory.htm>
<6><Linux 逻辑分区的内存><iphbi/iphbilinuxmemory.htm>
<5><扩展部件><iphat/iphatexpansionunit.htm>
<5><控制台><iphat/iphatlparconsole.htm>
<6><HMC><iphat/iphathmc.htm>
<6><操作控制台><iphat/iphatoperationsconsole.htm>
<6><双轴控制台><iphat/iphattwinax.htm>
<5><I/O><iphbl/iphbliodevices.htm>
<6><I/O 池><iphbl/iphbliopools.htm>
<6><IOP><iphbl/iphbllpariop.htm>
<7><标记的资源><iphbl/iphbltag.htm>
<7><可切换设备><iphbl/iphblswitchiop.htm>
<6><IOA><iphbl/iphbllparioa.htm>
<7><装入源><iphbl/iphblloadsrc.htm>
<7><备用重启设备><iphbl/iphblaltipl.htm>
<7><磁盘单元><iphbl/iphbldunit.htm>
<5><5250 CPW><iphbl/iphblinterperform.htm>
<3><逻辑分区的通信选项><iphat/iphatlparcommunication.htm>
<4><虚拟以太网><iphat/iphatvirtualethernetoverview.htm>
<5><用于 AIX 的虚拟以太网><iphat/iphatvirtualethernetaix.htm>
<5><用于 i5/OS 的虚拟以太网><iphat/iphatvirtualetherneti5os.htm>
<5><用于 Linux 的虚拟以太网><iphat/iphatvirtualethernetlinux.htm>
<4><HSL OptiConnect><iphbl/iphblhslopticonnect.htm>
<4><虚拟 OptiConnect><iphbl/iphblvirtualopticonnect.htm>
<3><逻辑分区实用程序><iphat/iphatlparutilities.htm>
<4><LPAR 验证工具><iphat/iphatlvt.htm>
<4><分区装入管理器><iphat/iphatplmoverview.htm>
<2><AIX 分区><iphbk/iphbkaixkickoff.htm>
<3><新增功能><iphbk/iphbkaixwhatsnew.htm>
<3><可打印的 PDF><iphbk/iphbkprintthis.htm>
<3><方案><iphbk/iphbkaixscenarios.htm>
<4><方案：使用分区概要文件><iphat/iphatscenario1.htm>
<4><方案：使用系统概要文件><iphbk/iphatscenario2.htm>
<4><方案：创建 AIX 逻辑分区和分区概要文件><iphbk/iphbkscenario_config_aix_lpar.htm>
<4><方案：通过远程 PC 客户机使用 HMC><iphbk/iphbkscenario_remote_pc_client.htm>
<3><规划 AIX 逻辑分区><iphae/aixpartitions.htm>
<3><配置 AIX 逻辑分区><iphbk/iphbkaixconfigure.htm>
<4><创建逻辑分区和分区概要文件><iphbl/iphblcreatelpar.htm>
<4><创建其它分区概要文件><iphbl/iphblcreateprofile.htm>
<4><指定受管系统的服务分区><iphbl/iphblservicepartition.htm>
<4><根据制造缺省配置创建分区><iphbl/iphbldefaultlpar.htm>
<4><迁移逻辑分区><iphbm/iphbmkickoff.htm>
<4><复制分区概要文件><iphbl/iphblcopyprofile.htm>
<4><创建系统概要文件><iphbl/iphblsysprofile.htm>
<4><复制系统概要文件><iphbl/iphblcopysysp.htm>
<4><创建接收 i5/OS 资源的 AIX 分区><iphbl/iphblaixpartition.htm>
<4><删除逻辑分区><iphbl/iphbldeletelpar.htm>
<4><复位服务器><iphbl/iphblresetserver.htm>
<3><使用分区负载管理器配置对 AIX 分区的资源管理><iphbk/iphbkconfigureplm.htm>
<4><安装分区负载管理器><iphbk/iphbkinstplm.htm>
<4><安装 OpenSSH 软件工具><iphbk/iphbkopenssh.htm>
<4><配置资源管理和控制><iphbk/iphbkrmc_configuration.htm>
<4><配置策略文件><iphbk/iphbkpolicy_file_configuration.htm>
<4><验证安装和配置><iphbk/iphbkverifyinst.htm>
<5><验证 OpenSSH 安装><iphbk/iphbkverifysshinst.htm>
<5><验证资源管理和控制配置><iphbk/iphbkverifyrmc.htm>
<3><管理 AIX 逻辑分区><iphbk/iphbkaixmanage.htm>
<4><管理逻辑分区的分区概要文件><iphbk/iphblmanagepprofile.htm>
<5><激活分区概要文件><iphbk/iphblactivate.htm>
<5><更改分区概要文件属性><iphbk/iphblchangeprofile.htm>
<5><删除分区概要文件><iphbk/iphbldeleteprofile.htm>
<4><管理逻辑分区的系统概要文件><iphbk/iphblmanagesprofile.htm>
<5><激活系统概要文件><iphbk/iphblactivatesysprofile.htm>
<5><删除系统概要文件><iphbk/iphbldeletesysprofile.htm>
<4><动态管理 AIX 逻辑分区资源><iphbk/iphbkaixmanagedynamic.htm>
<5><动态管理物理 I/O 设备或插槽><iphbk/iphbldlpariop.htm>
<5><动态管理处理能力><iphbk/iphbldlparprocpower.htm>
<5><动态管理内存><iphbk/iphbldlparmemory.htm>
<5><安排动态资源移动><iphbk/iphblschedulelpar.htm>
<4><远程管理分区><iphbk/iphblpartitionremote.htm>
<4><查询分区状态><iphbk/iphbkquerystatus.htm>
<4><使用 i5/OS 管理 AIX 分区><iphbk/iphblaixmanagingkickoff.htm>
<5><添加虚拟磁盘到 AIX 分区><iphbk/iphbldynamicallyaddingaixdisks.htm>
<5><管理网络服务器描述><iphbk/iphblaixnwsdoverview.htm>
<6><在 NSWD 中链接 NWSSTG><iphbk/iphblaixlinknwsstg.htm>
<6><删除 NSWD><iphbk/iphblaixdeletenwsd.htm>
<6><删除磁盘驱动器><iphbk/iphblaixdelete.htm>
<5><运行 AIX 时使用 IPL 类型><iphbk/iphblaixbootsource.htm>
<5><备份和恢复接收 i5/OS 资源的 AIX 分区><iphbk/iphblaixrecoverykickoff.htm>
<6><使用 tar 命令><iphbk/iphblaixsavrstaixtar.htm>
<6><使用 i5/OS 命令><iphbk/iphblos400commandaix.htm>
<5><备份与 AIX 相关的 NWSD 和磁盘驱动器><iphbk/iphblaixbackup.htm>
<6><备份 AIX 分区的 NWSD><iphbk/iphblaixbackupnwsd.htm>
<6><复原 AIX 分区的 NWSD><iphbk/iphblaixrestore.htm>
<6><取消 AIX 分区到磁盘驱动器的链接><iphbk/iphblaixunlink.htm>
<7><保存 i5/OS 中的服务器对象><iphbk/iphblaixobjects.htm>
<4><备份和恢复 AIX 逻辑分区><iphbk/iphbkaixbackup.htm>
<4><获取修订><iphbk/iphbkgettingfixes.htm>
<3><使用逻辑分区上安装的 AIX><iphbk/iphbkaixuse.htm>
<4><在逻辑分区中重新启动和关闭 AIX><iphbk/iphbkshutdownaix.htm>
<5><使用 HMC 关闭><iphbk/iphbkshutdownhmc.htm>
<5><重新启动 AIX 逻辑分区><iphbk/iphbkrestartaix.htm>
<4><管理安全><iphbk/iphbksecuirtylpar.htm>
<4><管理性能><iphbk/iphbkperformancelpar.htm>
<3><故障诊断><iphbk/iphbkaixtroubleshoot.htm>
<4><逻辑分区参考码><iphbl/iphblosrefcode.htm>
<3><相关信息><iphbk/iphbkaixrelated.htm>
<2><i5/OS 分区><iphbl/iphbllparos400kickoff.htm>
<3><新增功能><iphbl/iphblwhatsnew.htm>
<3><可打印的 PDF><iphbl/iphblprintpdfs.htm>
<3><方案><iphbl/iphblscenarioskickoff.htm>
<3><规划 i5/OS 逻辑分区><iphbl/iphblplanos400.htm>
<3><配置 i5/OS 逻辑分区><iphbl/iphblconfigurelpar.htm>
<4><创建逻辑分区和分区概要文件><iphbl/iphblcreatelpar.htm>
<4><创建其它分区概要文件><iphbl/iphblcreateprofile.htm>
<4><指定受管系统的服务分区><iphbl/iphblservicepartition.htm>
<4><根据制造缺省配置创建分区><iphbl/iphbldefaultlpar.htm>
<4><迁移 i5/OS 逻辑分区><iphbl/iphblmigrateos400.htm>
<4><复制分区概要文件><iphbl/iphblcopyprofile.htm>
<4><创建系统概要文件><iphbl/iphblsysprofile.htm>
<4><复制系统概要文件><iphbl/iphblcopysysp.htm>
<4><使用 i5/OS 虚拟 I/O 资源创建 AIX 分区><iphbl/iphblaixpartition.htm>
<5><创建网络服务器描述><iphbl/iphblaixnwsd.htm>
<5><连接到虚拟控制台><iphbl/iphblaixvirtualconsole.htm>
<5><启动和停止 NWSD><iphbl/iphblvaryonaix.htm>
<4><使用 i5/OS 虚拟 I/O 资源创建 Linux 分区><iphbl/iphblioserverpartition.htm>
<5><创建网络服务器描述><iphbl/iphblnwsd.htm>
<5><连接到虚拟控制台><iphbl/iphblvirtualconsole.htm>
<5><启动和停止 NWSD><iphbl/iphblvaryon.htm>
<4><删除逻辑分区><iphbl/iphbldeletelpar.htm>
<4><复位服务器><iphbl/iphblresetserver.htm>
<3><管理 i5/OS 逻辑分区><iphbl/iphblmanageos400.htm>
<4><管理分区概要文件><iphbl/iphblmanagepprofile.htm>
<5><激活分区概要文件><iphbl/iphblactivate.htm>
<5><更改分区概要文件属性><iphbl/iphblchangeprofile.htm>
<5><删除分区概要文件><iphbl/iphbldeleteprofile.htm>
<4><管理系统概要文件><iphbl/iphblmanagesprofile.htm>
<5><激活系统概要文件><iphbl/iphblactivatesysprofile.htm>
<5><删除系统概要文件><iphbl/iphbldeletesysprofile.htm>
<4><动态管理逻辑分区资源><iphbl/iphblmanageos400movement.htm>
<5><动态管理 5250 CPW><iphbl/iphbldlparinteractive.htm>
<5><动态管理物理 I/O 设备或插槽><iphbl/iphbldlpariop.htm>
<5><动态管理内存><iphbl/iphbldlparmemory.htm>
<5><动态管理处理能力><iphbl/iphbldlparprocpower.htm>
<5><安排动态资源移动><iphbl/iphblschedulelpar.htm>
<4><远程管理分区><iphbl/iphblpartitionremote.htm>
<4><为 i5/OS 逻辑分区安装新硬件><iphbl/iphblinstallos400hw.htm>
<4><使用 i5/OS 资源管理 AIX 分区><iphbl/iphblaixmanagingkickoff.htm>
<5><添加虚拟磁盘到 AIX 分区><iphbl/iphbldynamicallyaddingaixdisks.htm>
<5><管理网络服务器描述><iphbl/iphblaixnwsdoverview.htm>
<6><在 NSWD 中链接 NWSSTG><iphbl/iphblaixlinknwsstg.htm>
<6><删除 NWSD><iphbl/iphblaixdeletenwsd.htm>
<6><删除虚拟磁盘驱动器><iphbl/iphblaixdelete.htm>
<5><运行 AIX 时使用 IPL 类型><iphbl/iphblaixbootsource.htm>
<5><备份和恢复 AIX 逻辑分区><iphbl/iphblaixrecoverykickoff.htm>
<6><使用 tar 命令><iphbl/iphblaixsavrstaixtar.htm>
<6><使用 i5/OS 命令><iphbl/iphblos400commandaix.htm>
<5><备份与 AIX 分区相关联的 NSWD 和磁盘驱动器><iphbl/iphblaixbackup.htm>
<6><备份 AIX 分区的 NWSD><iphbl/iphblaixbackupnwsd.htm>
<6><复原 AIX 分区的 NWSD><iphbl/iphblaixrestore.htm>
<6><取消 AIX 分区到磁盘驱动器的链接><iphbl/iphblaixunlink.htm>
<7><保存 i5/OS 中的服务器对象><iphbl/iphblaixobjects.htm>
<4><使用 i5/OS 资源管理 Linux 分区><iphbl/iphblmanagingkickoff.htm>
<5><添加虚拟磁盘到 Linux 分区><iphbl/iphbldynamicallyaddingdisks.htm>
<5><管理网络服务器描述><iphbl/iphblnwsdoverview.htm>
<6><在 NSWD 中链接 NWSSTG><iphbl/iphbllinknwsstg.htm>
<6><删除 NWSD><iphbl/iphbldeletenwsd.htm>
<6><删除虚拟磁盘驱动器><iphbl/iphbldelete.htm>
<5><运行 Linux 时使用 IPL 类型><iphbl/iphblbootsource.htm>
<5><备份和恢复 Linux 逻辑分区><iphbl/iphblrecoverykickoff.htm>
<6><使用 tar 命令><iphbl/iphblsavrstaixtar.htm>
<6><使用 i5/OS 命令><iphbl/iphblos400command.htm>
<5><备份与 Linux 分区相关联的 NWSD 和磁盘驱动器><iphbl/iphblbackup.htm>
<6><在 NWSSTG 上构建挽救映像><iphbl/iphblrecoverimage.htm>
<6><使用来自 NWSSTG 的挽救映像><iphbl/iphblrecoverysystem.htm>
<6><备份 Linux 分区的 NWSD><iphbl/iphblbackupnwsd.htm>
<6><复原 Linux 分区的 NWSD><iphbl/iphblrestore.htm>
<6><取消 Linux 分区到磁盘驱动器的链接><iphbl/iphblunlink.htm>
<7><保存 i5/OS 中的服务器对象><iphbl/iphblobjects.htm>
<4><获取修订><iphbl/iphblgettingfixes.htm>
<3><使用安装在逻辑分区上的 i5/OS><iphbl/iphblusingi5os.htm>
<4><在逻辑分区中重新启动和关闭 i5/OS><iphbl/iphblrestartos400.htm>
<5><关闭 i5/OS><iphbl/iphblpowerdownos400.htm>
<6><使用 HMC 关闭><iphbl/iphblsdlparhmc.htm>
<6><使用操作控制台关闭><iphbl/iphblsdlparoc.htm>
<5><更改 i5/OS 逻辑分区的运行方式><iphbl/iphblos400mode.htm>
<5><更改 i5/OS 逻辑分区的 IPL 类型><iphbl/iphblos400iplsource.htm>
<4><管理安全><iphbl/iphblsecuritylpar.htm>
<4><备份和恢复 i5/OS 数据><iphbl/iphblos400backupandrecovery.htm>
<4><对 i5/OS 的性能影响><iphbl/iphblos400performanceimpacts.htm>
<3><故障诊断><iphbl/iphbltroubleshootos400.htm>
<4><分区的参考码><iphbl/iphblosrefcode.htm>
<4><对 AIX 分区的错误进行故障诊断><iphbl/iphblaixtroubleshootingkickoff.htm>
<5><调试 NWSD 错误消息><iphbl/iphblaixnwsderrors.htm>
<4><对 Linux 分区的错误进行故障诊断><iphbl/iphbltroubleshootingkickoff.htm>
<5><调试 NWSD 错误消息><iphbl/iphblnwsderrors.htm>
<5><对 Linux 虚拟磁带进行故障诊断><iphbl/iphbltsaixtape.htm>
<4><需要授权的服务提供者协助的情况><iphbl/iphblservicerep.htm>
<5><在 i5/OS 逻辑分区上执行主存储器转储><iphbl/iphblperformsd.htm>
<5><使用带有 i5/OS 逻辑分区的远程服务><iphbl/iphblremoteservice.htm>
<5><关闭带有逻辑分区的电源域><iphbl/iphbldomain.htm>
<5><重新设置带有 i5/OS 逻辑分区的磁盘单元 IOP><iphbl/iphblresetunit.htm>
<3><相关信息><iphbl/iphbllparrelated.htm>
<2><Partitioning for Linux><iphbi/iphbikickoff.htm>
<3><What's new><iphbi/iphbiwhatnew.htm>
<3><Printable PDFs><iphbi/iphbiprintthis.htm>
<3><Concepts for Linux logical partitions><iphbi/iphbiconcept.htm>
<4><Hardware requirements for Linux logical partitions><iphbi/iphbihardware.htm>
<5><Supported hardware resources><iphbi/iphbidrivers.htm>
<5><Minimum configuration requirements><iphbi/iphbiminimumconfig.htm>
<5><Shared processor support><iphbi/iphbishared.htm>
<5><Console requirements><iphbi/iphbiconsole.htm>
<5><Storage options><iphbi/iphbistorage.htm>
<4><Virtual I/O devices><iphbi/iphbivirtualnative.htm>
<5><Virtual adapters><iphbi/iphbivirtualadapters.htm>
<5><Virtual serial adapters><iphbi/iphbivirtualserial.htm>
<5><Virtual SCSI adapters><iphbi/iphbivirtualscsi.htm>
<4><Communications options><iphbi/iphbinetworking.htm>
<4><Linux distributions><iphbi/iphbipowerlinux.htm>
<3><Scenarios for Linux logical partitions><iphbi/iphbiscenario.htm>
<4><Scenario: Using partition profiles><iphat/iphatscenario1.htm>
<4><Scenario: Using system profiles><iphat/iphatscenario2.htm>
<4><Scenario: Server consolidation><iphbi/iphbiserver.htm>
<4><Scenario: Capacity Upgrade on Demand><iphbi/iphbicuod.htm>
<3><Plan for Linux logical partitions><iphae/linuxpartitions.htm>
<3><Configuring Linux logical partitions><iphbi/iphbiconfig.htm>
<4><Creating a logical partition><iphbl/iphblcreatelpar.htm>
<4><Creating a partition profile><iphbl/iphblcreateprofile.htm>
<4><Migrating Linux logical partitions><iphbi/iphbimigration.htm>
<5><Migrating a Linux installation from iSeries to IBM eServer i5><iphbi/iphbimigratiseries.htm>
<5><Migrating a Linux installation from pSeries to IBM eServer p5><iphbi/iphbimigratpseries.htm>
<4><Copying a partition profile><iphbl/iphblcopyprofile.htm>
<4><Creating a system profile><iphbl/iphblsysprofile.htm>
<4><Copying a system profile><iphbl/iphblcopysysp.htm>
<4><Creating a logical partition using the i5/OS integrated virtual I/O server><iphbl/iphblioserverpartition.htm>
<3><Managing Linux logical partitions><iphbi/iphbimanage.htm>
<4><Managing partition profiles><iphbl/iphblmanagepprofile.htm>
<5><Activating a partition profile><iphbl/iphblactivate.htm>
<5><Deleting a partition profile><iphbi/iphbldeleteprofile.htm>
<4><Managing system profiles><iphbl/iphblmanagesprofile.htm>
<5><Activating a system profile><iphbl/iphblactivatesysprofile.htm>
<5><Deleting a system profile><iphbl/iphbldeletesysprofile.htm>
<4><Dynamically managing logical partition resources><iphbi/iphbilinuxmanagedynamic.htm>
<5><Dynamically managing physical I/O devices><iphbi/iphbilinuxdlpario.htm>
<5><Dynamically managing processing power><iphbi/iphbilinuxdlparprocpower.htm>
<4><Managing partitions remotely><iphbl/iphblpartitionremote.htm>
<4><Managing logical partition and operating system security><iphbl/iphblsecuritylpar.htm>
<4><Application support><iphbi/iphbiappsupport.htm>
<5><Samba support with i5/OS Netserver><iphbi/iphbinetserver.htm>
<5><Accessing i5/OS data using the Linux ODBC driver><iphbi/iphbiodbc.htm>
<4><Backing up and recovering Linux installations><iphbi/iphbibackup.htm>
<5><Managing logical partitions that use the i5/OS integrated virtual I/O server><iphbl/iphblmanagingkickoff.htm>
<5><Backing up and recovering Linux on pSeries><iphbi/iphbibackuppseries.htm>
<3><Using Linux installed on a logical partition><iphbi/iphbilinuxuse.htm>
<4><Restarting and shutting down Linux in a logical partition><iphbi/iphbishutdownlinux.htm>
<5><Restarting Linux logical partitions><iphbi/iphbirestartlinux.htm>
<5><Shutting down using the HMC><iphbi/iphbishutdownhmc.htm>
<3><Troubleshooting Linux logical partitions><iphbi/iphbitrouble.htm>
<3><Related information for Linux logical partitions><iphbi/iphbirelated.htm>
<2><使用虚拟 I/O 服务器><iphb1/iphb1kickoff.htm>
<3><可打印的 PDF><iphb1/iphb1_vios_printthis.htm>
<3><虚拟 I/O 服务器的概念><iphb1/iphb1_vios_concepts.htm>
<4><命令行界面><iphb1/iphb1_vios_concepts_cli.htm>
<4><用户类型><iphb1/iphb1_vios_concepts_user.htm>
<4><虚拟联网><iphb1/iphb1_vios_concepts_network.htm>
<5><链路聚集><iphb1/iphb1_vios_concepts_network_lnagg.htm>
<5><虚拟局域网（VLAN）><iphb1/iphb1_vios_concepts_network_vlan.htm>
<5><虚拟以太网适配器><iphb1/iphb1_vios_concepts_network_venet.htm>
<5><共享以太网适配器><iphb1/iphb1_vios_concepts_network_sea.htm>
<4><虚拟 SCSI><iphb1/iphb1_vios_concepts_stor.htm>
<5><虚拟 SCSI 设备类型><iphb1/iphb1_vios_concepts_stor_types.htm>
<5><逻辑卷存储器概述><iphb1/iphb1_vios_concepts_stor_lvovw.htm>
<5><物理卷><iphb1/iphb1_vios_concepts_stor_pv.htm>
<5><卷组><iphb1/iphb1_vios_concepts_stor_vg.htm>
<5><物理分区><iphb1/iphb1_vios_concepts_stor_pp.htm>
<5><逻辑分区><iphb1/iphb1_vios_concepts_stor_lp.htm>
<5><定额><iphb1/iphb1_vios_concepts_stor_quorum.htm>
<3><规划虚拟 I/O 服务器><iphb1/iphb1_vios_planning.htm>
<4><容量规划><iphb1/iphb1_vios_planning_cap.htm>
<4><高可用性><iphb1/iphb1_vios_planning_ha.htm>
<5><客户机分区><iphb1/iphb1_vios_planning_ha_client.htm>
<5><虚拟 I/O 服务器分区><iphb1/iphb1_vios_planning_ha_server.htm>
<4><安全性><iphb1/iphb1_vios_planning_sec.htm>
<4><限制><iphb1/iphb1_vios_planning_res.htm>
<3><配置虚拟 I/O 服务器><iphb1/iphb1_vios_configuring.htm>
<4><输入虚拟 I/O 服务器激活代码><iphb1/iphb1_vios_configuration_inputcode.htm>
<4><创建逻辑分区和分区概要文件><iphb1/iphb1_vios_configuring_partition.htm>
<4><安装虚拟 I/O 服务器><iphb1/iphb1_vios_configuring_install.htm>
<5><从 CD 安装 I/O 服务器><iphb1/iphb1_vios_configuring_installcd.htm>
<5><从 HMC 安装 I/O 服务器><iphb1/iphb1_vios_configuring_installhmc.htm>
<4><配置虚拟 SCSI><iphb1/iphb1_vios_configuring_vscsi.htm>
<4><配置共享以太网适配器><iphb1/iphb1_vios_configuring_sea.htm>
<3><管理虚拟 I/O 服务器><iphb1/iphb1_vios_managing.htm>
<4><在虚拟 I/O 服务器上管理用户类型><iphb1/iphb1_vios_managing_users.htm>
<4><管理共享以太网适配器><iphb1/iphb1_vios_managing_sea.htm>
<5><配置链路聚集><iphb1/iphb1_vios_managing_lnagg.htm>
<5><网络属性><iphb1/iphb1_vios_managing_sea_attr.htm>
<4><管理虚拟 SCSI><iphb1/iphb1_vios_managing_vscsi.htm>
<5><创建虚拟目标设备><iphb1/iphb1_vios_managing_vscsi_targ.htm>
<5><创建逻辑卷和卷组><iphb1/iphb1_vios_managing_vscsi_vg.htm>
<4><维护虚拟 I/O 服务器><iphb1/iphb1_vios_managing_maintain.htm>
<5><导入或导出卷组><iphb1/iphb1_vios_managing_vscsi_impexp.htm>
<5><更新虚拟 I/O 服务器><iphb1/iphb1_vios_managing_updating.htm>
<5><备份和恢复虚拟 I/O 服务器><iphb1/iphb1_vios_backup.htm>
<6><备份><iphb1/iphb1_vios_backup_backup.htm>
<7><备份到磁带><iphb1/iphb1_vios_backup_tape.htm>
<7><备份到远程文件系统><iphb1/iphb1_vios_backup_filesystem.htm>
<7><备份到 CD 或 DVD><iphb1/iphb1_vios_backup_cddvd.htm>
<6><恢复><iphb1/iphb1_vios_backup_restore.htm>
<7><从磁带中恢复><iphb1/iphb1_vios_backup_restore_tape.htm>
<7><从远程文件系统中恢复><iphb1/iphb1_vios_backup_restore_file.htm>
<7><从 CD 或 DVD 中恢复><iphb1/iphb1_vios_backup_restore_cddvd.htm>
<5><监控虚拟 I/O 服务器><iphb1/iphb1_vios_managing_maintain_monitor.htm>
<3><对虚拟 I/O 服务器进行故障诊断><iphb1/iphb1_vios_troubleshooting.htm>
<4><虚拟 I/O 服务器问题><iphb1/iphb1_vios_troubleshooting_serv.htm>
<5><虚拟 SCSI 问题><iphb1/iphb1_vios_troubleshooting_serv_vscsi.htm>
<5><联网问题><iphb1/iphb1_vios_troubleshooting_network.htm>
<4><客户机分区问题><iphb1/iphb1_vios_troubleshooting_client.htm>
<3><相关信息><iphb1/iphb1_vios_related.htm>
<2><相关信息><iphat/iphatlparrelated.htm>
<1><安装操作系统><iphaw/kickoff.htm>
<2><安装 AIX><iphay/iphayinstallaix.htm>
<2><安装 i5/OS><iphax/iphaxinstallos400.htm>
<2><安装 Linux><iphaz/iphazinstalllinux.htm>
<1><Managing your server><ipha1/kick.htm>
<2><Hardware Management Console><ipha1/hardwaremanagementconsolehmc.htm>
<3><Printable PDFs><ipha1/printablepdf.htm>
<3><HMC concepts><ipha1/concepts.htm>
<4><HMC graphical user interface><ipha1/hmcgraphicaluserinterface.htm>
<5><Navigation area><ipha1/navigationarea.htm>
<5><Contents area><ipha1/contentsarea.htm>
<5><Menu bar><ipha1/menubar.htm>
<5><Toolbar><ipha1/toolbar.htm>
<5><Status bar><ipha1/statusbar.htm>
<5><HMC applications><ipha1/hmcapps.htm>
<4><HMC access control><ipha1/managingusers.htm>
<5><Managed resource roles><ipha1/resourcemanagement.htm>
<5><Task roles><ipha1/taskmanagement.htm>
<4><Overview of HMC roles><ipha1/overviewofroles.htm>
<5><Predefined HMC roles><ipha1/predefinedroles.htm>
<5><Customized HMC roles><ipha1/defcustomrole.htm>
<4><Overview of HMC tasks><ipha1/overviewoftasksandroles.htm>
<5><HMC configuration tasks><ipha1/syscon.htm>
<5><HMC user management tasks><ipha1/uman.htm>
<5><Managed system profile tasks><ipha1/sysprof.htm>
<5><Managed system tasks><ipha1/mansys.htm>
<5><Logical partition tasks><ipha1/partitiontasks.htm>
<5><Capacity on Demand tasks><ipha1/cuodtasks.htm>
<5><Virtualization Engine Technologies tasks><ipha1/vetasks.htm>
<5><Service tasks><ipha1/problemdetermination.htm>
<4><Managed system power-on modes><ipha1/poweronmodes.htm>
<4><Managed system power-on states><ipha1/poweronstates.htm>
<4><Types of HMC network connections><ipha1/netconhmc.htm>
<5><Connecting the HMC to a network><ipha1/connectingthehmctoanetwork.htm>
<5><Private and open networks in the HMC environment><ipha1/privpubnetwork.htm>
<5><Using the HMC as a DHCP server><ipha1/hmcdhcpserver.htm>
<3><Working with the HMC><ipha1/workingwiththehmc.htm>
<4><Logging in, shutting down, rebooting, and logging off the HMC><ipha1/shutdownrestartlogout.htm>
<5><Logging in to the HMC><ipha1/poweron.htm>
<5><Shutting down, rebooting, and logging off the HMC><ipha1/reboot.htm>
<4><Configuring the HMC management environment><ipha1/configuringyourhmcmanagementenvironment.htm>
<5><Testing network connectivity><ipha1/testingnetworkconnectivity.htm>
<5><Installing and using the remote client><ipha1/usingtheremoteclient.htm>
<5><Working with the HMC machine code><ipha1/scndupgrd.htm>
<5><Changing the HMC interface language><ipha1/changingtheinterfacelanguage.htm>
<5><Configuring the keyboard layout><ipha1/configkeyboardlayout.htm>
<5><Using the HMC remote command line><ipha1/usingtheremotecommandline.htm>
<6><Viewing HMC remote command information><ipha1/viewingremcom.htm>
<6><Setting up secure script execution between SSH clients and the HMC><ipha1/settingupsecurescriptexecutionsbetweensshclientsandthehmc.htm>
<6><Enabling and disabling HMC remote commands><ipha1/enablinganddisablingremotecommands.htm>
<4><Viewing recent HMC activity><ipha1/viewingrecenthmcactivity.htm>
<4><Managing partition profile information><ipha1/backingupandrestoringprofileinformation.htm>
<5><Backing up profile data><ipha1/backupprofdata.htm>
<5><Initializing profile data><ipha1/initializeprofdata.htm>
<5><Restoring profile data><ipha1/restoreprofdata.htm>
<5><Removing profile data><ipha1/removeprofdata.htm>
<4><Backing up and restoring the HMC><ipha1/backingupthehmc.htm>
<5><Backing up critical HMC data><ipha1/backingupcriticalconsoledata.htm>
<5><Restoring critical HMC data><ipha1/restoringcriticalconsoledata.htm>
<6><Restoring from DVD><ipha1/restoredvd.htm>
<6><Restoring from a remote server><ipha1/restoreremotesys.htm>
<5><Scheduling and reviewing scheduled HMC backups><ipha1/schedulingandreviewingscheduledbackups.htm>
<5><Saving HMC upgrade data><ipha1/savingupgradedata.htm>
<5><Reinstalling the HMC machine code><ipha1/recoveringthehmc.htm>
<4><Managing security on the HMC><ipha1/managingsecurityonyourhmc.htm>
<5><Creating a user><ipha1/creatingusers.htm>
<5><Creating a customized HMC role><ipha1/customroles.htm>
<5><Editing user information and roles><ipha1/editinguserinformationandroles.htm>
<5><Copying user information><ipha1/copyingusers.htm>
<5><Viewing a user description><ipha1/viewinguserdefinitions.htm>
<5><Deleting a user><ipha1/deletingauser.htm>
<5><Changing HMC user passwords><ipha1/changingpasswords.htm>
<5><Changing the managed system's password><ipha1/updatepassword.htm>
<3><Working with managed systems using the HMC><ipha1/workingwithmanagedsystemsusingyourhmc.htm>
<4><Powering on and off the managed system><ipha1/poweringonandoffyourmanagedsystem.htm>
<5><Powering on the managed system><ipha1/poweringonthemanagedsystem.htm>
<5><Powering off the managed system><ipha1/poweringoffthemanagedsystem.htm>
<5><Scheduling power-on and power-off operations for the managed system><ipha1/poweringonandoffyourmanagedsystem.htm>
<4><Accessing the managed system><ipha1/accessingyourmanagedsystem.htm>
<5><Overview of passwords><ipha1/overviewofthepasswords.htm>
<5><Virtual operating system consoles><ipha1/virtualoperatingsystemconsoles.htm>
<6><Verify that consoles are configured><ipha1/checktoseeifconsolesareconfigured.htm>
<6><5250 console><ipha1/fiftytwofifty.htm>
<7><Preparing the logical partition to connect><ipha1/setupconfig5250.htm>
<7><Connecting to a 5250 console><ipha1/connecting5250.htm>
<8><Connecting to a 5250 console locally><ipha1/local5250.htm>
<8><Connecting to a 5250 console remotely><ipha1/remote5250.htm>
<6><Virtual terminal><ipha1/virtualterminal.htm>
<5><Control panel functions><ipha1/virtualcontrolpanel.htm>
<4><Finding data about the managed systems><ipha1/findingdataaboutyourmanagedsystems.htm>
<5><Viewing information about a managed system><ipha1/viewinginformationaboutamanagedsystem.htm>
<5><Updating managed system information><ipha1/updatingmanagedsysteminformationdisplayedinthecontentsarea.htm>
<5><Deleting the managed system><ipha1/deletingthemanagedsystemfromthecontentsarea.htm>
<5><Disconnecting another HMC connection><ipha1/releasinganhmclockonamanagedsystem.htm>
<4><Recovering partition data on a managed system><ipha1/recoverpartitiondata.htm>
<4><Managing operating systems><ipha1/managingresourcesonamanagedsystem.htm>
<5><Resetting the operating system on a partition><ipha1/resetoslpar.htm>
<5><Shutting down an operating system><ipha1/shutdownos.htm>
<4><Adding managed systems to the HMC environment><ipha1/addingmanagedsystems.htm>
<4><Extending an existing network><ipha1/usingexisting.htm>
<5><Using an existing private network with the HMC acting as a DHCP server><ipha1/usinganexisting.htm>
<5><Using an existing open network><ipha1/usinganexistingopen.htm>
<4><Servicing the managed system><ipha1/servicingyourmanagedsystem.htm>
<3><Related information><ipha1/relatedinformation.htm>
<2><Advanced System Management Interface><iphbp/kickoff.htm>
<3><Printable PDF><iphbp/printablepdf.htm>
<3><Concepts><iphbp/genconcepts.htm>
<4><ASMI requirements><iphbp/requirements.htm>
<4><ASMI authority levels><iphbp/asmiauthority.htm>
<4><ASMI login restrictions><iphbp/asmilogin.htm>
<3><Setting up login profile><iphbp/loginprofile.htm>
<4><Changing password><iphbp/chgpwd.htm>
<4><Retrieving login audits><iphbp/loginaudit.htm>
<4><Changing default language><iphbp/defaultlang.htm>
<3><Viewing system information><iphbp/viewsysinfo.htm>
<4><Viewing vital product data><iphbp/viewvpd.htm>
<4><Viewing persistent storage><iphbp/viewpersistent.htm>
<4><Viewing system power control network trace><iphbp/viewsyspctrace.htm>
<4><Viewing progress indicator from previous boot><iphbp/lastsysboot.htm>
<4><Viewing progress indicator history><iphbp/viewsystrace.htm>
<3><Controlling the system power><iphbp/usingsyspc.htm>
<4><Powering the system on and off><iphbp/poweronoff.htm>
<4><Setting auto-power restart><iphbp/autopower.htm>
<4><Performing an immediate power off><iphbp/fastoff.htm>
<4><Performing a system reboot><iphbp/sysreboot.htm>
<4><Setting wake-on LAN><iphbp/remotepower.htm>
<3><Changing system configuration><iphbp/viewsysconfig.htm>
<4><Changing system name><iphbp/systemname.htm>
<4><Changing the processing unit identifier><iphbp/viewcec.htm>
<4><Configuring I/O enclosures><iphbp/configio.htm>
<4><Changing time of day><iphbp/viewtime.htm>
<4><Changing firmware update policy><iphbp/codesource.htm>
<4><Enabling PCI error injection policy><iphbp/pcierrorinject.htm>
<4><Configuring monitoring><iphbp/confmonitor.htm>
<4><Changing the interposer plug count><iphbp/interplugcount.htm>
<4><Changing the number of HSL Opticonnect Connections><iphbp/hslconnect.htm>
<4><Deconfiguring hardware><iphbp/hardwaredeconfig.htm>
<5><Setting deconfiguration policies><iphbp/viewdeconfig.htm>
<5><Changing processor configuration><iphbp/viewprocconfig.htm>
<5><Changing memory configuration><iphbp/viewmemconfig.htm>
<5><Clearing all deconfiguration errors><iphbp/cleardeconfig.htm>
<4><Programming vital product data><iphbp/programvpd.htm>
<5><Setting the system brand><iphbp/systembrand.htm>
<5><Setting the system identifiers><iphbp/systemkeywords.htm>
<5><Setting the system enclosure type><iphbp/systemenclosures.htm>
<4><Changing service indicators><iphbp/serviceindicators.htm>
<5><Turning off system attention indicator><iphbp/sysattn.htm>
<5><Enabling enclosure indicators><iphbp/enclosureindicators.htm>
<5><Changing indicators by location code><iphbp/viewbylocation.htm>
<5><Performing an LED test on the control panel><iphbp/lamptest.htm>
<3><Configuring network services><iphbp/networkservices.htm>
<4><Configuring network interfaces><iphbp/networkconfig.htm>
<4><Configuring network access><iphbp/networkaccess.htm>
<4><Debugging virtual TTY><iphbp/debugvirtualtty.htm>
<3><Using on-demand utilities><iphbp/ondemandutil.htm>
<4><Order Capacity on Demand><iphbp/cuodinfo.htm>
<4><Activate Capacity on Demand><iphbp/cuodactivation.htm>
<4><Resume server firmware after CoD activation><iphbp/cuodrecovery.htm>
<4><Use Capacity on Demand commands><iphbp/cuodcmd.htm>
<3><Using concurrent maintenance utilities><iphbp/concurrentmaint.htm>
<4><Controlling power to IDE devices><iphbp/viewidectrl.htm>
<4><Preparing the operator panel><iphbp/opanelmaint.htm>
<3><Troubleshooting the system using service aids><iphbp/usingsysservaid.htm>
<4><Displaying error and event logs><iphbp/displayerrlog.htm>
<4><Enabling serial port snoop><iphbp/usingsysservaid.htm>
<4><Initiating a platform dump><iphbp/platformdump.htm>
<4><Initiating a service processor dump><iphbp/spdump.htm>
<4><Configuring a serial port setup><iphbp/serialportsetup.htm>
<4><Configuring your modem><iphbp/configmodem.htm>
<4><Configuring call-home and call-in policy><iphbp/callhomesetup.htm>
<4><Testing the call-home policy><iphbp/callhometest.htm>
<4><Rebooting the service processor><iphbp/rebootfsp.htm>
<4><Restoring your server to factory settings><iphbp/factorysettings.htm>
<2><Operations Console><ipha1/opsconsole.htm>
<2><Twinaxial console><iphbn/kickoff.htm>
<1><Working with Capacity on Demand><ipha2/kickoff.htm>
<2><What's new><ipha2/whatnew.htm>
<2><Printable PDFs><ipha2/print.htm>
<2><Preparing for Capacity on Demand><ipha2/codprep.htm>
<3><Planning for Capacity on Demand><ipha2/cuodplancapacity.htm>
<3><Determining when to activate resources><ipha2/cuodplannumprocs.htm>
<3><Setting up your environment for CoD><ipha2/cuodplansetup.htm>
<3><Software licensing considerations><ipha2/cuodconswlic.htm>
<2><Working with Capacity Upgrade on Demand><ipha2/cuod.htm>
<3><Concepts><ipha2/cuodconparent.htm>
<4><Processors and memory units><ipha2/cuodconproc.htm>
<4><Activation codes><ipha2/cuodconpodact.htm>
<3><Ordering Capacity Upgrade on Demand activation features><ipha2/cuodorder.htm>
<3><Using Capacity Upgrade on Demand><ipha2/cuoduse.htm>
<4><Activating resources permanently><ipha2/cuodactpermcap.htm>
<4><Viewing settings for CoD resources><ipha2/cuoddisplayresources.htm>
<4><Viewing and saving CoD code generation information><ipha2/cuodviewsave.htm>
<2><Working with Trial Capacity on Demand><ipha2/tcod.htm>
<3><Starting Trial Capacity on Demand><ipha2/tcodorder.htm>
<3><Viewing settings for CoD resources><ipha2/tcoddisplayresources.htm>
<3><Viewing and saving CoD code generation information><ipha2/tcodviewsave.htm>
<3><Stopping Trial Capacity on Demand><ipha2/tcodend.htm>
<2><Working with On/Off Capacity on Demand><ipha2/oocod.htm>
<3><Concepts><ipha2/onoffcodconcepts.htm>
<4><Processor or memory days><ipha2/onoffcodconprocdays.htm>
<4><On/Off CoD enablement code><ipha2/onoffcodconenable.htm>
<4><Billing for On/Off Capacity on Demand><ipha2/onoffcodconbill.htm>
<3><Enabling On/Off Capacity on Demand><ipha2/onoffcodenable.htm>
<4><Obtaining and entering your On/Off CoD enablement code><ipha2/onoffcodenableobtain.htm>
<4><Establishing monthly reporting to IBM><ipha2/onoffcodenablereport.htm>
<3><Using On/Off Capacity on Demand><ipha2/onoffcoduse.htm>
<4><Activating resources temporarily on your server><ipha2/onoffcodenablerequest.htm>
<4><Viewing settings for CoD resources><ipha2/onoffcodusedisplay.htm>
<4><Viewing and saving CoD information><ipha2/onoffcoduseviewinfo.htm>
<4><Stopping an On/Off CoD request><ipha2/onoffcodusestoprequest.htm>
<4><Discontinuing On/Off Capacity on Demand><ipha2/onoffcodend.htm>
<2><Working with Reserve Capacity on Demand><ipha2/rcod.htm>
<3><Concepts><ipha2/reservecodconcepts.htm>
<4><Processor days><ipha2/reservecodconprocdays.htm>
<4><Reserve capacity prepaid feature and reserve capacity prepaid code><ipha2/reservecodconenable.htm>
<3><Enabling Reserve Capacity on Demand><ipha2/reservecodenable.htm>
<3><Using Reserve Capacity on Demand><ipha2/reservecoduse.htm>
<4><Viewing settings for Reserve CoD processors><ipha2/reservecodusedisplay.htm>
<4><Viewing shared processor information><ipha2/reservecodusesharedprocpool.htm>
<2><Related information><ipha2/relatedinfo.htm>
<1><Troubleshooting><ipha3/kickoff.htm>
<2><What's new><ipha3/whatsnew.htm>
<2><Printable PDF><ipha3/printablepdf.htm>
<2><Managing problems><ipha3/howservermanages.htm>
<2><Detecting problems><ipha3/detecting.htm>
<3><Attention lights overview><ipha3/attention_lights.htm>
<3><Messages overview><ipha3/messages_overview.htm>
<3><Reference codes overview><ipha3/reference_codes_overview.htm>
<2><Analyzing and handling problems><ipha3/analyzing.htm>
<3><Beginning problem analysis><ipha3/begin_pa.htm>
<4><AIX problem analysis><ipha3/aix_problem_analysis.htm>
<4><i5/OS problem analysis><ipha3/os400_problem_analysis.htm>
<4><Linux problem analysis><ipha3/linux_problem_analysis.htm>
<3><Collecting codes><ipha3/collectsrc.htm>
<3><Reference codes list><ipha3/referencecodes.htm>
<4><HMC error codes><ipha3/hmc_codes.htm>
<5><0xxxxx><ipha3/hmc_codes_0.htm>
<5><HSCE xxxx><ipha3/hmc_codes_hsce.htm>
<5><HSCI xxxx><ipha3/hmc_codes_hsci.htm>
<5><HSCL xxxx><ipha3/hmc_codes_hscl.htm>
<5><HSCP xxxx><ipha3/hmc_codes_hscp.htm>
<5><HSCS xxxx><ipha3/hmc_codes_hscs.htm>
<4><SRN codes><ipha3/srn_codes.htm>
<3><Supporting diagnostics><ipha3/diagnostic_tools.htm>
<4><Online and standalone diagnostics><ipha3/aix_diagnostics.htm>
<5><Online diagnostics><ipha3/online_procedure.htm>
<5><Standalone diagnostics from CD><ipha3/standalone_procedure.htm>
<5><Standalone diagnostics from a NIM server><ipha3/standalone_nim.htm>
<4><Performing a slow boot><ipha3/slow_boot.htm>
<4><Performing dumps><ipha3/mainstoragedump.htm>
<5><Platform and SP dumps><ipha3/platform_dump.htm>
<5><i5/OS main storage dumps><ipha3/main_dump.htm>
<5><Managing dumps><ipha3/manage_dumps.htm>
<6><Copying a dump><ipha3/copy_platform.htm>
<6><Reporting a dump><ipha3/report_msd.htm>
<6><Deleting a dump><ipha3/delete_msd.htm>
<4><End-of-service procedure><ipha3/endofservice.htm>
<4><Correcting the managed system state><ipha3/managedsystemstates.htm>
<4><Recovering partition data on a managed system><ipha3/recover_managed.htm>
<4><Resetting the service processor><ipha3/reset_sp.htm>
<4><Resetting the managed system connection from the HMC><ipha3/reset_connection.htm>
<4><Checking for an IP conflict><ipha3/ip_conflict.htm>
<3><Viewing messages><ipha3/view_messages.htm>
<4><AIX messages><ipha3/view_aix_mess.htm>
<4><HMC messages><ipha3/view_hmc_messages.htm>
<4><i5/OS messages><ipha3/view_os400_mess.htm>
<4><Linux messages><ipha3/view_linux_messages.htm>
<3><Using Service Focal Point><ipha3/sfp.htm>
<4><Viewing serviceable events><ipha3/viewevents.htm>
<4><Closing serviceable events><ipha3/closeevent.htm>
<4><Repairing serviceable events><ipha3/repairevent.htm>
<5><Viewing serviceable event partition information><ipha3/vieweventpartition.htm>
<4><Activating and deactivating LEDs><ipha3/fru_leds.htm>
<4><Setting up connection monitoring><ipha3/setup.htm>
<3><Replacing and verifying parts><ipha3/verifying_the_repair.htm>
<2><Reporting problems><ipha3/reporting.htm>
<3><Problem reporting forms><ipha3/problem_forms.htm>
<3><Contacting IBM support><ipha3/contacting_support.htm>
<2><Related information><ipha3/related.htm>
<1><Service and support><ipha5/kickoff.htm>
<2><Customer service and support><ipha5/customersvcsupport.htm>
<3><What's new><ipha5/whatnew.htm>
<3><Printable PDF><ipha5/printablepdf.htm>
<3><Overview><ipha5/overview.htm>
<4><Elements of your service environment><ipha5/elements.htm>
<5><Connectivity><ipha5/connectivity.htm>
<5><Service information><ipha5/inventory.htm>
<5><Electronic problem reporting><ipha5/electronicpbmreport.htm>
<5><Fixes><ipha5/introfixes.htm>
<5><Remote support><ipha5/introremotesupport.htm>
<4><Introduction to the service applications><ipha5/intro2.htm>
<5><Electronic Service Agent><ipha5/electronicserviceagent.htm>
<5><Remote Support Facility><ipha5/remotesupportfacility.htm>
<5><Service Focal Point><ipha5/servicefocalpoint.htm>
<4><Map of service applications and functions><ipha5/mapsvcappsfunc.htm>
<3><Scenarios><ipha5/scenarios.htm>
<4><Scenarios: AIX><ipha5/aixscenarios.htm>
<5><Scenario: Multiple AIX logical partitions with an HMC><ipha5/aixmultiple.htm>
<5><Scenario: Multiple servers running AIX without an HMC><ipha5/aixwohmc.htm>
<4><Scenarios: i5/OS><ipha5/os400scenarios.htm>
<5><Scenario: Multiple i5/OS partitions using VPN on an i5/OS partition><ipha5/os400multiplevpn.htm>
<5><Scenario: Multiple i5/OS partitions using the HMC modem><ipha5/os400multiplehmc.htm>
<5><Scenario: Multiple i5/OS partitions using the modem on an i5/OS partition><ipha5/os400multiplemodemonpartition.htm>
<5><Scenario: i5/OS without an HMC using VPN><ipha5/os400wohmc.htm>
<4><Scenario: Linux><ipha5/linuxscenarios.htm>
<5><Scenario: Linux without an HMC><ipha5/linuxwohmc.htm>
<3><Setting up your service environment><ipha5/settingup.htm>
<4><Using the Guided Setup Wizard to set up your HMC><ipha5/useguidedsetup.htm>
<4><Networking for your service environment><ipha5/networking.htm>
<4><Setting up your HMC to connect to your service provider><ipha5/setuphmcconnect.htm>
<5><Choosing your connection method><ipha5/choosemethod.htm>
<5><Specifying your company's contact and account information><ipha5/contactnconnect.htm>
<5><Specifying options for connection monitoring><ipha5/lanoption.htm>
<5><Configuring Electronic Service Agent on your HMC><ipha5/configesa.htm>
<6><Specifying when and how often ESA sends information><ipha5/whennhowesa.htm>
<6><Setting up notifications for service events><ipha5/notificationsvcevents.htm>
<6><Viewing your system information on the Internet><ipha5/viewinfoesa.htm>
<4><Setting up your server to connect to your service provider><ipha5/setupsvrtoconnect.htm>
<5><Setting up AIX to connect to your service provider><ipha5/setupaixpartition.htm>
<5><Setting up i5/OS to connect to your service provider><ipha5/setupos400partition.htm>
<6><Setting up i5/OS to connect using VPN><ipha5/os400connectvpn.htm>
<6><Setting up i5/OS to connect using the modem on server><ipha5/os400connectmodem.htm>
<6><Setting up i5/OS to connect through the HMC><ipha5/os400connecthmc.htm>
<5><Setting up Linux to connect to your service provider><ipha5/setuplinuxpartition.htm>
<5><Setting up the service processor to connect to your service provider><ipha5/serviceprocessorconnect.htm>
<4><Testing the connection><ipha5/testingconnection.htm>
<3><Customizing your service settings><ipha5/customizing.htm>
<4><Specifying when and how often you send information><ipha5/whennhowesa.htm>
<4><Setting up notifications for service events><ipha5/notificationsvcevents.htm>
<4><Viewing your system information on the Internet><ipha5/viewinfoesa.htm>
<4><Specifying options for connection monitoring><ipha5/lanoption.htm>
<3><Reporting problems><ipha5/reporting.htm>
<4><Reporting problems when HMC is not available><ipha5/reporthmcdown.htm>
<4><Reporting problems when server is down><ipha5/reportserverdown.htm>
<3><Getting fixes><ipha5/fixes.htm>
<4><HMC fixes><ipha5/fixeshmc.htm>
<4><Server firmware fixes><ipha5/fixesserverfirmware.htm>
<5><Concepts and terms><ipha5/fixfirmwareconcepts.htm>
<5><Scenarios: Server firmware><ipha5/fixfirmwarescenarios.htm>
<6><Scenario: Get firmware fixes with an HMC><ipha5/fixfirmscenhmc.htm>
<6><Scenario: Get firmware fixes without an HMC><ipha5/fixfirmscennohmc.htm>
<6><Scenario: Get firmware fixes through OS/400 for HMC managed system><ipha5/fixfirmscenhmcopsys.htm>
<5><Manage firmware fixes><ipha5/fixfirmwaremanage.htm>
<6><View existing firmware levels><ipha5/viewexistlevel.htm>
<6><View available firmware levels><ipha5/viewavaillevels.htm>
<6><View firmware fix cover letter><ipha5/viewfixcoverletter.htm>
<6><Get specific firmware fix><ipha5/getspecificfix.htm>
<6><Install server firmware fix permanently><ipha5/install_fix_permanently.htm>
<6><Remove current firmware level><ipha5/removecurrentlevel.htm>
<6><Upgrade to new firmware release><ipha5/upgrade_to_new_ga.htm>
<4><Operating system fixes><ipha5/fixesoperatingsystems.htm>
<3><Enabling remote support><ipha5/remotesupport.htm>
<4><Remote support methods><ipha5/remotesupportmethods.htm>
<4><Enabling remote support on the HMC><ipha5/enableremotesupporthmc.htm>
<4><Enabling remote support without an HMC><ipha5/enableremotesupportwohmc.htm>
<3><Related information><ipha5/related.htm>
<2><Service provider information><iphau/kickoff.htm>
<3><What's new><iphau/whatsnew.htm>
<3><Printable PDF><iphau/printing.htm>
<3><Start of call procedure><iphau/starthere.htm>
<4><Symptom index><iphau/symptomlist.htm>
<3><Detecting problems><iphau/detecting.htm>
<4><i5/OS problem determination><iphau/probdeterminationos400.htm>
<5><Using the Service Action Log (SAL)><iphau/usingsal.htm>
<5><Using the Product Activity Log (PAL)><iphau/usingpal.htm>
<5><Using the problem log><iphau/usingproblog.htm>
<4><AIX problem determination><iphau/probdetermination.htm>
<4><Linux problem determination><iphau/probdeterminationlinux.htm>
<4><System unit problem determination><iphau/sysunitprobdetermination.htm>
<4><HMC machine code problem determination><iphau/hmcsoftprobdet.htm>
<3><Analyzing problems><iphau/analyzing.htm>
<4><Problems with loading and starting the operating system (AIX and Linux)><iphau/bootprb.htm>
<4><Problems with noncritical resources><iphau/noncritical.htm>
<4><Intermittent problems><iphau/intermittent.htm>
<5><About intermittent problems><iphau/imitabout.htm>
<5><General intermittent problem checklist><iphau/imitchecklist.htm>
<5><Analyzing intermittent problems><iphau/imitanalyzing.htm>
<5><Intermittent symptoms><iphau/imitsymptoms.htm>
<5><Failing area intermittent isolation procedures><iphau/imitintpips.htm>
<4><IPL problems><iphau/iplprob.htm>
<5><Cannot perform IPL from the control panel (no reference code)><iphau/noiplcontrolpanel.htm>
<5><Cannot perform IPL at a specified time (no reference code)><iphau/noiplspectime.htm>
<5><Cannot automatically perform IPL after a power failure><iphau/noiplpowerfail.htm>
<4><Power problems><iphau/powerprob.htm>
<5><Cannot power on system unit (no reference code)><iphau/pwrpsystemon.htm>
<5><Cannot power on I/O expansion unit (no reference code)><iphau/pwrpsecondaryon.htm>
<5><Cannot power off system or I/O expansion unit><iphau/pwrpoff.htm>
<3><Reference codes><ipha6/kickoff.htm>
<4><List of system reference codes><ipha6/refcodelist.htm>
<4><Using system reference codes><ipha6/usingsrcs.htm>
<4><List of service request numbers><ipha6/srnsmain.htm>
<4><Using service request numbers><ipha6/srnsusing.htm>
<4><List of progress codes><ipha6/progcodesmain.htm>
<4><Using progress codes><ipha6/progcodesusing.htm>
<3><Isolating problems><iphau/isolating.htm>
<4><Using failing item codes><iphau/failingitems.htm>
<4><Symbolic FRUs><iphau/fru.htm>
<4><Problem isolation procedures><iphau/pips.htm>
<5><Bus, HSL><iphau/pipbus.htm>
<6><Breaking down a RIO/HSL or PCI bus reference code><iphau/pipbusbreakrc.htm>
<6><DSA translation><iphau/pipbusdsabdown.htm>
<6><Card positions><iphau/pipbuscardpos.htm>
<6><Converting the loop number to NIC port location labels><iphau/pipbuslooptonic.htm>
<6><PCI bus isolation using AIX, Linux, or the HMC><iphau/pipbusaixhmc.htm>
<6><Verifying an HSL, bus, or multi-adapter bridge repair><iphau/pipbusverifying.htm>
<5><Communication><iphau/pipcomm.htm>
<5><Disk unit><iphau/pipdiskunit.htm>
<5><I/O processor (IOP)><iphau/pipsdiop.htm>
<5><Intermittent isolation procedures><iphau/pipint.htm>
<5><Licensed internal code (LIC)><iphau/piplic.htm>
<5><Logical partition><iphau/piplpar.htm>
<5><Operations Console><iphau/opcip.htm>
<5><Power><iphau/pippower.htm>
<5><Routers><iphau/piprtr.htm>
<5><Service processor><iphau/pipsp.htm>
<5><Tape unit isolation procedures><iphau/piptape.htm>
<5><Twinaxial workstation I/O processor><iphau/piptwinaxial.htm>
<5><Workstation adapter><iphau/pipwsa.htm>
<5><Workstation adapter console><iphau/wscip01.htm>
<4><Failing function codes><iphau/ffcodes.htm>
<5><Failing function code list><iphau/ffclist.htm>
<4><AIX fast path MAP><iphau/aixfastpath.htm>
<3><Resolving problems><iphau/resolving.htm>
<4><Finding part locations><iphau/locations.htm>
<5><Location codes><iphau/loccodes.htm>
<5><Model 520><iphau/locsqsf2.htm>
<5><Model 550><iphau/loc550.htm>
<5><Model 570><iphau/locsql4mlx.htm>
<5><5074, 8079-002, and 8093-002 expansion units><iphau/loc5074.htm>
<5><5079 expansion unit><iphau/loc5079.htm>
<5><0588 and 5088 expansion units><iphau/loc5088.htm>
<5><5094, 5294, and 8094-002 expansion units><iphau/loc5094.htm>
<5><0595 and 5095 expansion units><iphau/loc5095.htm>
<5><7311-D10 and 7311-D11 expansion units><iphau/locd11.htm>
<5><7311-D20 expansion unit><iphau/locd20.htm>
<5><Integrated xSeries adapter (IXA) card><iphau/locixa.htm>
<5><Addresses><iphau/addresses.htm>
<4><Part assembly diagrams><iphau/partassemblies.htm>
<5><Model 520><iphau/pa520.htm>
<5><Model 550><iphau/pa550.htm>
<5><Model 570><iphau/pa570.htm>
<5><0588, 5088, 5079, and 5294 expansion units><iphau/pafinal5088.htm>
<5><5074 and 5094 expansion units><iphau/pafinal5074.htm>
<5><0595 and 5095 expansion units><iphau/pafinal5095.htm>
<5><7311-D11 expansion unit><iphau/pad11.htm>
<5><7311-D20 expansion unit><iphau/pad20.htm>
<5><7014 rack><iphau/pa7014.htm>
<4><Part number catalog><iphau/partnumbers.htm>
<5><System parts><iphau/partssystem.htm>
<5><Cables><iphau/partscables.htm>
<5><Miscellaneous parts><iphau/partsmisc.htm>
<5><HMC parts><iphau/partshmc.htm>
<4><Removing and replacing parts><iphau/removereplace.htm>
<5><Model 520><iphau/rrsqsf2.htm>
<5><Model 550><iphau/rr550.htm>
<5><Model 570><iphau/rrsql4mlx.htm>
<5><5074, 5079, 8079-002, and 8093-002 expansion units><iphau/rr50745079.htm>
<5><0588 and 5088 expansion units><iphau/rr5088.htm>
<5><5094, 5294, and 8094-002 expansion units><iphau/rr5094.htm>
<5><0595 and 5095 expansion units><iphau/rr5095.htm>
<5><7311-D11 expansion unit><iphau/rrd11.htm>
<5><7311-D20 expansion unit><iphau/rrd20.htm>
<5><RIO/HSL cables><iphau/rrhslriocables.htm>
<5><Type 2748, 2757, 2763, 2778, 2780, 2782, 4758, 4764, 5703 cards><iphau/rrcards.htm>
<6><Replacing the cache battery pack><iphau/rrcachebatpack.htm>
<6><Replacing the cache directory card><iphau/rrcachedircard.htm>
<6><Replacing the battery on a type 4758 card><iphau/rr4758battery.htm>
<6><Disabling the cryptographic coprocessor on a type 4758 card><iphau/rr4758crypto.htm>
<6><Replacing the battery on a type 4764 card><iphau/rr4764battery.htm>
<6><Disabling the cryptographic coprocessor on a type 4764 card><iphau/rr4764crypto.htm>
<3><Verifying the repair><iphau/verifying.htm>
<4><Verifying the repair from the HMC><iphau/endcall.htm>
<4><Verifying the repair for i5/OS><iphau/verifyingos400.htm>
<5><Verifying a concurrent repair><iphau/verifyingos400con.htm>
<5><Verifying a dedicated repair><iphau/verifyingos400ded.htm>
<4><Verifying the repair for AIX><iphau/verifyingaix.htm>
<3><Reference information><iphau/referenceinfo.htm>
<4><i5/OS data recovery information><iphau/os400recovery.htm>
<5><Disk unit recovery procedures><iphau/recovdisk.htm>
<6><Starting disk service><iphau/recovdiskstart.htm>
<6><Exchanging a disk unit with a device parity protection><iphau/recovdiskdpp.htm>
<6><Exchanging a disk unit with mirrored protection><iphau/recovdiskmir.htm>
<6><Resuming mirrored protection><iphau/recovdiskrmp.htm>
<6><Saving data and initializing the disk unit><iphau/recovdiskinit.htm>
<6><Initializing the disk unit and copying to disk><iphau/recovdiskcopy.htm>
<6><Copy the contents of the LIC log><iphau/recovdiskdst.htm>
<5><SRC address formats><iphau/refcodeformats.htm>
<5><Storage I/O card modes and jumpers><iphau/jumpers.htm>
<6><Setting or changing the mode of an I/O card><iphau/jumpset.htm>
<6><Mode jumper has been overridden><iphau/jumpoverridden.htm>
<6><Mode jumper is missing><iphau/jumpmissing.htm>
<5><Logical partitions><iphau/lpar.htm>
<6><Determining if the system has logical partitions><iphau/lpardetermine.htm>
<6><Determining if the system has guest partitions><iphau/lparguest.htm>
<6><Determining the release level of a guest partition><iphau/lparguestrelease.htm>
<6><Determining the hosting partition of a guest partition><iphau/lparguesthost.htm>
<5><Load-source disks and alternate IPL devices><iphau/loadsrcdisks.htm>
<6><Finding the load-source disk on systems without mirrored protection><iphau/loadsrcnonmir.htm>
<6><Finding the load-source disk on systems with mirrored protection><iphau/loadsrcmir.htm>
<6><Alternate IPL device><iphau/loadsrcaltipl.htm>
<5><Reclaiming IOP cache storage><iphau/reclaimiop.htm>
<4><Powering on and powering off><iphau/onoff.htm>
<5><Powering on the system><iphap/crustartsys.htm>
<5><Powering off the system><iphap/crustopsys.htm>
<5><Powering on a partition><iphbl/iphblactivate.htm>
<5><Powering off a partition><iphbl/iphblpowerdownos400.htm>
<5><Powering off an expansion unit><iphau/offexpansion.htm>
<5><Using the control panel power button to power off><iphau/offpanelbutton.htm>
<4><Working with AIX diagnostics><iphau/working01.htm>
<5><General AIX diagnostic information><iphau/gen01.htm>
<5><Using online and standalone diagnostics><iphau/aixdiagnostics.htm>
<5><AIX tasks and service aids><iphau/aixserviceaids.htm>
<4><HMC machine code problems><iphau/hmcreference.htm>
<5><Viewing the HMC console logs><iphau/viewhmclogs.htm>
<4><Service functions><iphau/sfun.htm>
<5><Dedicated service tools (DST)><iphau/dst.htm>
<6><System paging environments><iphau/page.htm>
<7><Stand-alone paging (non-paging)><iphau/pagealone.htm>
<7><Limited paging><iphau/pagelimited.htm>
<7><Full paging><iphau/pagefull.htm>
<6><Accessing DST><iphau/hadst.htm>
<7><Performing an IPL to DST><iphau/xidst.htm>
<7><Changing a service tools user ID><iphau/chgstid.htm>
<7><Resetting the QSECOFR service tools user ID><iphau/resetqsecofr.htm>
<7><Performing an IPL to DST for secondary partitions><iphau/iplsp.htm>
<7><Pressing the system request key while the system is operational><iphau/req.htm>
<7><Selecting Function 21 while the system is operational><iphau/x21.htm>
<7><Performing an alternate IPL to DST><iphau/altdst.htm>
<6><Function keys in DST><iphau/fkeys.htm>
<6><Exiting DST><iphau/end.htm>
<6><DST options><iphau/dstmf.htm>
<7><Installing LIC><iphau/dstopilic.htm>
<7><Installing the operating system><iphau/dstopios.htm>
<7><Perform an IPL><iphau/pipl.htm>
<7><Work with LIC><iphau/ll.htm>
<7><Work with disk units><iphau/wdskdst.htm>
<8><Work with disk configuration><iphau/dskcf.htm>
<8><Display disk configuration><iphau/disdc.htm>
<8><Work with ASP threshold><iphau/aspt.htm>
<8><Work with ASP configuration><iphau/aspc.htm>
<8><Work with mirrored protection><iphau/mirr.htm>
<8><Work with device parity protection><iphau/devpa.htm>
<8><Work with disk compression><iphau/dskcomp.htm>
<8><Work with disk unit recovery><iphau/dskrec.htm>
<8><Disk unit problem recovery procedures><iphau/dupr.htm>
<7><Work with DST environment><iphau/contenv.htm>
<8><Work with active service tools><iphau/wactst.htm>
<8><Work with system devices><iphau/outprt.htm>
<8><Work with service tools user IDs><iphau/chgdst.htm>
<8><Work with system values><iphau/wwval.htm>
<8><Work with alternate installation device><iphau/dstbootload.htm>
<7><Select DST console mode><iphau/wwserv.htm>
<7><Start a service tool><iphau/dstool.htm>
<8><Display/Alter/Dump><iphau/dad.htm>
<8><Licensed internal code log><iphau/licl.htm>
<8><Licensed internal code trace><iphau/tlic.htm>
<8><Hardware service manager><iphau/hsman.htm>
<8><Main storage dump manager><iphau/msdm.htm>
<8><Product activity log (PAL)><iphau/pro.htm>
<8><Operator panel functions><iphau/oppanfun.htm>
<8><Performance data collector><iphau/perfdata.htm>
<8><Work with communications trace><iphau/wwct.htm>
<7><Perform automatic installation of the operating system><iphau/osautoinstall.htm>
<7><Save Licensed Internal Code (LIC)><iphau/savelic.htm>
<7><Work with save storage and restore storage><iphau/srstorage.htm>
<7><Work with remote service support><iphau/rdst.htm>
<8><Allowing access for remote service support><iphau/edst.htm>
<8><Activating remote service support><iphau/adst.htm>
<7><Work with system partitions><iphau/wrksysop.htm>
<7><Work with system capacity><iphau/wwcapacity.htm>
<7><Work with system security><iphau/wwsecurity.htm>
<7><End batch restricted state><iphau/endbatchrest.htm>
<5><Hardware service manager><iphau/hsm.htm>
<6><HSM options><iphau/hsmenu.htm>
<7><Packaging hardware resources><iphau/phr.htm>
<7><Logical hardware resources><iphau/lhr.htm>
<7><Locate resource by name><iphau/lr.htm>
<7><Failed and non-reporting resources><iphau/fai.htm>
<7><System Power Control Network (SPCN)><iphau/spcnh.htm>
<7><Work with service action log><iphau/gap.htm>
<7><Display label location work sheet><iphau/lloca.htm>
<7><Device concurrent maintenance><iphau/cncmnt.htm>
<6><Collecting information and performing functions from the HSM displays><iphau/keys.htm>
<7><Change resource details><iphau/cdet.htm>
<7><Concurrent maintenance><iphau/hsmconc.htm>
<7><Create frame information><iphau/crtf.htm>
<7><Debug the resource><iphau/dbug.htm>
<7><Display address><iphau/addrss.htm>
<7><Display associated resources><iphau/assoc.htm>
<7><Display card gap information><iphau/dispcardgap.htm>
<7><Display failed resources><iphau/dfai.htm>
<7><Display hardware contained within package><iphau/dispconthw.htm>
<7><Display location information><iphau/displocinfo.htm>
<7><Display non-reporting resources><iphau/dnonh.htm>
<7><Display resources associated with IOP><iphau/drai.htm>
<7><Display resource details><iphau/disprdetails.htm>
<7><Display resources requiring attention><iphau/requ.htm>
<7><Display resource status><iphau/stat.htm>
<7><Display serial/part numbers, logical address, and status/resource name information><iphau/dseri.htm>
<7><Display system bus resources><iphau/sbr.htm>
<7><Display system information><iphau/dspsysinfo.htm>
<7><Display unresolved locations><iphau/hsmun.htm>
<7><Print><iphau/rprt.htm>
<7><Refresh the display><iphau/refreshdsp.htm>
<7><Remove non-reporting resource info><iphau/hsmrem.htm>
<7><Reserve frame space><iphau/rfs.htm>
<7><Using high-speed link (HSL) specific options><iphau/hsloptions.htm>
<8><Display detail><iphau/hsldspdetail.htm>
<8><Display system information><iphau/dispsysinfo.htm>
<8><Display port information><iphau/dspportinfo.htm>
<8><Resources associated with loop><iphau/resassocloop.htm>
<7><Verify resources><iphau/vfyr.htm>
<6><Symbols on the HSM displays><iphau/indic.htm>
<6><Printing the system configuration list><iphau/pscl.htm>
<6><Verification procedures><iphau/vpro.htm>
<7><Hardware service manager - verify><iphau/hsmverify.htm>
<7><Verify optical storage unit><iphau/vfycd.htm>
<7><Verify tape><iphau/vfytap.htm>
<7><Verify communications><iphau/vfycmn.htm>
<5><Product activity log (PAL)><iphau/pal.htm>
<6><The Service Action Log (SAL)><iphau/sal.htm>
<6><PAL location><iphau/palloc.htm>
<6><Recovering from PAL errors while in DST><iphau/palrecov.htm>
<6><Paging environment><iphau/vdst.htm>
<6><Options and function keys><iphau/palop.htm>
<7><Analyze log><iphau/analyzelog.htm>
<7><Display or print by log ID><iphau/dspprtid.htm>
<7><Change PAL sizes><iphau/chgpalsizes.htm>
<7><Work with removable media lifetime statistics><iphau/intv.htm>
<7><Display or print removable media session statistics><iphau/dspprtstats.htm>
<7><Reference code description><iphau/refcodedesc.htm>
<7><Sort by... function><iphau/sortb.htm>
<7><Address information function><iphau/addin.htm>
<7><View description><iphau/viewdescfun.htm>
<7><Hexadecimal PAL data><iphau/hexdta.htm>
<6><Interpreting PAL reports><iphau/hiwelr.htm>
<7><Some considerations when interpreting PAL reports><iphau/palconsider.htm>
<7><Resource name><iphau/rn.htm>
<7><Resource type, model, and location><iphau/restml.htm>
<7><Class><iphau/class.htm>
<7><System reference code><iphau/srefcode.htm>
<7><Multiple SRC entries><iphau/multisrc.htm>
<7><Logical address format><iphau/la.htm>
<7><Sequence number><iphau/seqnum.htm>
<7><Secondary code><iphau/secondcode.htm>
<7><Table ID><iphau/tabid.htm>
<7><IPL source/state><iphau/iplss.htm>
<7><Hexadecimal reports><iphau/hexr.htm>
<8><More information from hexadecimal reports><iphau/diplpaliop.htm>
<5><Service reference procedures><iphau/srp.htm>
<6><Setting the system date and time><iphau/sdt.htm>
<6><Determining the dominant operating system><iphau/oprun.htm>
<6><System password><iphau/stpas.htm>
<6><System unique identifier><iphau/suid.htm>
<6><Determining a primary or alternate console><iphau/dpac.htm>
<6><Locating the system's load source from the system console><iphau/lsysload.htm>
<6><History file><iphau/hl.htm>
<6><Low-level debug (LLD) and data collecting procedures><iphau/lld.htm>
<7><Displaying data for functions 63 and 64><iphau/lld54c.htm>
<6><Logical partitions><iphau/lparinfo.htm>
<7><Examples: Missing or non-reporting system bus resources><iphau/missresc.htm>
<7><Determining the release level of a logical partition><iphau/lpardrlp.htm>
<7><Locating a partition's console and load source><iphau/lparspc.htm>
<7><Querying logical partition time and date><iphau/ptdq.htm>
<7><Finding the SRC history list for a logical partition><iphau/lparsrchist.htm>
<7><Accessing the panel functions of a logical partition><iphau/lparppf.htm>
<7><Determining which logical partition owns a FRU or system I/O resource><iphau/lpardopsior.htm>
<7><Selecting IPL source and mode for a logical partition><iphau/lparipltypmod.htm>
<6><IASP/Clustering><iphau/cluster.htm>
<7><Determining if a tower is configured as switchable under OptiConnect><iphau/switchtwr.htm>
<7><Determining the power controlling and current logical system ownership of a tower><iphau/twrowner.htm>
<7><Determining the resource name and HSL loop number of an HSL I/O bridge><iphau/resnameprocedure.htm>
<7><Switching ownership of a tower's switchable resources><iphau/switchowner.htm>
<7><Switching the mode of a tower's switchable resources><iphau/switchmode.htm>
<5><Control panel functions><iphau/cpfu.htm>
<6><Values for IPL types, key modes, and speeds><iphau/iplvalues.htm>
<6><Ways to access the control panel><iphau/cpfcways.htm>
<6><Control panel function descriptions><iphau/cpfdc.htm>
<7><Primary control panel functions><iphau/normfunc.htm>
<7><Extended control panel functions><iphau/extfunc.htm>
<7><Low-level debug (LLD) panel functions><iphau/lldfunc.htm>
<5><System reference code (SRC) information><iphau/srci.htm>
<6><SRC formats><iphau/srcd2.htm>
<7><Word 1 - SRC general information><iphau/x11.htm>
<7><Word 2 - System status information><iphau/xf12.htm>
<8><Main storage dump indicator (M)><iphau/f12m.htm>
<8><IPL state indicator (I)><iphau/f12i.htm>
<8><IPL type last initiated indicator (G)><iphau/f12g.htm>
<6><System reference codes (SRCs)><iphau/srcson.htm>
<7><SRC format description><iphau/srcformatdesc.htm>
<7><Hardware related SRC formats><iphau/vlcpsf.htm>
<7><Logical partition SRC descriptions and actions><iphau/lparurcs.htm>
<7><LIC detected PRC formats><iphau/fmt61.htm>
<7><LIC URC groups><iphau/vmcrc.htm>
<7><IPL status SRCs><iphau/iplsrc.htm>
<7><General status SRCs><iphau/gssrc.htm>
<5><Initial program load (IPL) information><iphau/iplin.htm>
<6><IPL type, mode, and speed options><iphau/idesct.htm>
<6><Methods to perform IPL><iphau/iplmethods.htm>
<6><Alternate installation IPL><iphau/bootload.htm>
<6><IPL sequence><iphau/iplsequence.htm>
<7><Service processor initialization><iphau/sp.htm>
<7><LIC initialization><iphau/hlic.htm>
<8><Log entries><iphau/logentries.htm>
<6><Status SRCs><iphau/ipls.htm>
<5><Licensed Internal Code (LIC)><iphau/lic.htm>
<6><Fixes and cumulative PTF packages><iphau/cum.htm>
<6><Displaying LIC fixes><iphau/ptfl.htm>
<6><Utilities to install and restore LIC><iphau/mir.htm>
<7><Utility to install LIC><iphau/mcl.htm>
<7><Utility to restore LIC><iphau/mcr.htm>
<6><Authorized Program Analysis Report (APAR)><iphau/aparmtr.htm>
<5><System architecture and configuration><iphau/ossf.htm>
<6><System power overview><iphau/spwo.htm>
<7><Power supply><iphau/pwrsup.htm>
<7><Battery power unit><iphau/xbpu.htm>
<7><System Power Control Network (SPCN)><iphau/spcn.htm>
<7><SPCN menu flow><iphau/spcn9.htm>
<8><Fields on the SPCN display><iphau/spcnfields.htm>
<8><Display detail option><iphau/ddr.htm>
<9><Fields on the Display Detail for Frame display><iphau/detframe.htm>
<9><Fields on the Display Detail for Unit display><iphau/detunit.htm>
<6><High speed link><iphau/hsl.htm>
<6><Multi-adapter bridge><iphau/multiadapt.htm>
<6><Resource names><iphau/names.htm>
<6><Hardware configuration restrictions><iphau/rest.htm>
<6><Communications card, cable, and wrap connector reference><iphau/comccwc.htm>
<6><Communications signal voltage levels><iphau/comsigvolt.htm>
<5><Working with storage dumps><iphau/srpa.htm>
<6><Automatic main storage dump><iphau/amsd.htm>
<6><Performing a main storage dump to disk (manual MSD)><iphau/msdtd.htm>
<6><Copying a main storage dump><iphau/copmsd.htm>
<7><Work with current main storage dump><iphau/wwcurdump.htm>
<7><Work with copies of main storage dumps><iphau/wwdumpcopies.htm>
<6><Main storage dump status><iphau/msds.htm>
<6><Error recovery for dumps><iphau/erp.htm>
<6><Performing a service processor storage dump><iphau/spdump_condor.htm>
<6><Copying the IOP storage dump to removable media><iphau/copydtd.htm>
<6><Copying the service processor storage dump to removable media (models 270, 8xx, SB2, SB3)><iphau/cpy_spdump.htm>
<6><Performing an IOP dump using HSM (all models)><iphau/duhsm.htm>
<6><IOP dump information in the PAL (all models)><iphau/dupal.htm>
<5><i5/OS operating system><iphau/os.htm>
<6><DST in i5/OS full paging environment><iphau/dsto.htm>
<6><DST in i5/OS limited paging environment><iphau/dstol.htm>
<6><System Service Tools (SST)><iphau/ssto.htm>
<7><Accessing SST><iphau/hasst.htm>
<7><SST options><iphau/sstmf.htm>
<8><Start a service tool><iphau/starttool.htm>
<8><Work with active service tools><iphau/wwactive.htm>
<8><Work with disk units><iphau/wwdsku.htm>
<8><Work with diskette data recovery><iphau/wwdd.htm>
<9><Processing restrictions><iphau/wwddprest.htm>
<9><Alter diskette data><iphau/add.htm>
<9><Read data from diskette><iphau/drd.htm>
<9><Write data to diskette><iphau/dwd.htm>
<9><Display diskette data><iphau/ddd.htm>
<9><Print reports><iphau/pdd.htm>
<9><How to use the Work with Diskette Data Recovery option><iphau/ddrhow.htm>
<8><Work with system partitions><iphau/wwsyspart.htm>
<8><Work with system capacity><iphau/wwscap.htm>
<8><Work with system security><iphau/wwssec.htm>
<8><Work with service tools user IDs><iphau/wwstid.htm>
<7><SST function keys><iphau/sstfunk.htm>
<6><Online problem analysis and resolution><iphau/opar.htm>
<7><System-detected problems><iphau/sdp.htm>
<8><Problem log><iphau/plog.htm>
<8><Messages relating to hardware failures><iphau/mpt.htm>
<7><Customer-detected problems><iphau/cdp.htm>
<7><Service support facility><iphau/supfac.htm>
<6><Displaying i5/OS PTFs><iphau/ptfo.htm>
<6><i5/OS or LIC APAR information><iphau/aparos.htm>
<6><How to reset an I/O processor card while the system is up and running><iphau/riop.htm>
<6><Varying configuration descriptions on and off><iphau/uvary.htm>
<6><Commonly used i5/OS service commands><iphau/cusc.htm>
<7><Work with System Value (WRKSYSVAL) command><iphau/xsysval.htm>
<7><Service attributes (DSPSRVA or  CHGSRVA) commands><iphau/srvval.htm>
<8><ANZPRBAUTO><iphau/anzp.htm>
<8><CRITMSGUSR><iphau/critmsgusr.htm>
<8><RPTPRBAUTO><iphau/rptprb.htm>
<8><RPTSRVPVD><iphau/srvpvd.htm>
<8><SNDDTAPKT><iphau/snddtapkt.htm>
<8><PTFINSTYP><iphau/ptfinst.htm>
<7><Change Transmit Level (CHGXMTLVL) command><iphau/chgxl.htm>
<7><Work with Hardware Products (WRKHDWPRD) command><iphau/wrkhrd.htm>
<8><Using the configuration description label information to prepare for a system upgrade><iphau/before.htm>
<8><Using the configuration description label information after a system upgrade><iphau/after.htm>
<6><Verify commands><iphau/vfyc.htm>
<7><Verify communications><iphau/vfy.htm>
<8><Procedure><iphau/vfyproc.htm>
<8><Test descriptions><iphau/tede.htm>
<9><Remote modem test><iphau/rmodem.htm>
<9><Local modem test><iphau/lmodem.htm>
<9><Communications cable test><iphau/commcab.htm>
<9><Communications I/O adapter test><iphau/commio.htm>
<9><Communications I/O processor test><iphau/commiop.htm>
<9><Communications I/O processor memory test><iphau/commiopm.htm>
<9><Communications port A modem and coupler test><iphau/commporta.htm>
<9><External ring test><iphau/extring.htm>
<9><Communications/LAN link test><iphau/commlan.htm>
<9><Wireless network management utility><iphau/wire.htm>
<9><Wireless echo back test><iphau/web.htm>
<9><2620/2628 cryptographic processor card test><iphau/cpct.htm>
<9><2620/2628 cryptographic processor card wrap test><iphau/cpcwt.htm>
<9><2620/2628 external cryptographic hardware tests><iphau/echt.htm>
<9><LocalTalk interface test><iphau/lti.htm>
<6><Communications test><iphau/commt.htm>
<7><Wireless LAN adapter card indicators><iphau/indi.htm>
<7><Communications interface trace><iphau/cinttrace.htm>
<7><Concurrent LPDA-2 tests><iphau/lpda.htm>
<4><Setting expansion unit configuration ID and MTMS value><iphau/setconfigid.htm>
<4><Updating the world-wide port name><iphau/rrcardsupdateport.htm>
<4><Forms><iphau/forms.htm>
<5><Problem summary form><iphau/fmpsf.htm>
<5><Work with electrostatic discharge-sensitive parts><iphau/fmesd.htm>
<5><Service log><iphau/fmsrvlog.htm>
<5><HSL loop configuration and status form><iphau/fmhslform.htm>
<5><HSL link status diagnosis form><iphau/fmhsldiagchart.htm>
<5><Installed features in a PCI bridge set form><iphau/fmpciinstalled.htm>
<5><HSL cable location form><iphau/fmhslcableloctab.htm>
<3><Related information><iphau/related.htm>
<1><相关链接><ichwrelated.htm>
<1><词汇表><iphav/iphwglos.htm>
